If it has the hose from the engine block to the nozzle out the cowling there’s a really good chance one of those is blocked.I replaced the impeller and I have not pee out of the engine block? Any Help?
water is not coming out of the block?If it has the hose from the engine block to the nozzle out the cowling there’s a really good chance one of those is blocked.
So there is a handful of things it could be. If you only replaced the impeller it could be the housing base plate gaskets grommets on the housing or in the bottom of the engine block. If you installed the impeller in the correct rotational direction. If the old impeller shredded apart there could also be pieces of it lodged in the cooling system blocking the water flow.water is not coming out of the block?
Thank You I know where the pipe goes. On one end of the pipe there is a collar. Does the collar end go in the engine or the water pump? Does it matter?Water tube goes into a grommet at the powerhead (top) and at a grommet at the water pump (bottom). Take care not to bend over part of the grommet (or collar) as that will block flow.