OK so I have a 1987 Bayliner in a 70 hp Evinrude on the back of it. I have pulled all the carbs and had them cooked out and I have fire on all three ignition coils and had a compression test ran on all three and its pushing 95 down the line.. But when I pull the plug wire off the plug to check to see if it bogs down like the rest do, there is no change and when I put the boat in the water and run it, it is REALLY bogged down.. I'm at my wits end with this thing and I could really use some help.. I just want to enjoy my first boat and so far I haven't been able too.. Any advice from someone would be much appreciated