1974 Johnson 85 upgrade questions for HP

cxturboboost

Cadet
Thread starter
Joined
Jun 4, 2016
Messages
6
Hello,

I have a 1974 Johnson 85 HP. It struggles due to the weight of the bass boat. I'm somewhat confused as the reading indicates that some people can just change out carbs to the 115 / 135 and exhaust. I'm thinking maybe there is a year cut off that this is applicable? Also is 73-77 lower units appear to be compatible based on the reading I've done to swap over a 115/135 power head?

Any advise appreciated to give this old girl a little more umph.... Carbs cleaned, stator and power pack have been replaced and the motor runs as it should both idle and full load, just heavy boat. Compression is good in motor. Boat just really needed the 115 or 135 from the factory. I rebuilt the transom and made it thicker which also added weight.

Potentially this upgrade is not worth my time? Boat runs about 40.

Thank you in advance for any help!

Pete
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
As far as what will swap to the 85, keep in mind it is a 92 cubic inch block, the 115 and 135 are 99.6 cubic inch blocks. Heads won't swap. Really not worth installing/machining to add the bubble back exhaust, since: The small bore 85 does not have the intake/exhaust porting to support making 115 or 135 hp-it just does not breathe like the bigger bore blocks. Your 85 should make 125+ compression on each hole to be considered "factory fresh." You can swap a 115 or a 135 powerhead to your midsection.
 

cxturboboost

Cadet
Thread starter
Joined
Jun 4, 2016
Messages
6
Ok. Thank you for the information. Is the 73-77 year range correct for the 115/135 power head swap?
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Close. Any single thermostat (single vernatherm) block should fit. That includes all 73, 74, 75, and 76 models. The 77 model year is different regarding the 140. The 77-140 is the first year for the new style dual thermostats. When this changed for 77, the block base was modified. It will not retrofit for your purposes. The 77 115 is still the old single thermostat and it will fit.
 

cxturboboost

Cadet
Thread starter
Joined
Jun 4, 2016
Messages
6
OK.. Thank you... I'll start looking for a 115 or 135 in those years. don't care about the lower unit as mine is very good. Appreciate all the help. Just need a little more power for this old girl!!!
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Pistons and other internal parts only fit the 73 model year.------Now the 74 model year has parts the same as the 1990's models inside the block.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Just out of curiosity, have you checked your boat for water saturated foam? If it's weighed down, it'll definitely affect performance...
 

cxturboboost

Cadet
Thread starter
Joined
Jun 4, 2016
Messages
6
cut the boat apart and put in new foam when I rebuilt the transom...When I rebuilt the transom, I built it heavier like everything I do and that added weight. I'll look for a 74, 75, or 76 135 Johnson/evinrude....
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,353
Perhaps unnecessarily heavy then, and probably not necessary
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
When people who decide to replace transom or floor and stringers themselves, are often surprised to see how poorly constructed the boat came from the factory
 
Top