clemsonfor
Lieutenant Junior Grade
- Joined
- Sep 19, 2005
- Messages
- 1,011
So after hooking up the steering on this boat I finally got to something I had ignored till now. The dry rotted wires going into the engine. This is for the remote controls, starting and choke for the console. It's factory. The wires on the boat side of the plug are bad from the plug down 8-10"s or so. Nothing is available aftermarket, and nothing on eBay right now. Is there a way to get the pins out and splice in new wire to the good and put a pin back on and then insert that back into the plug? Or is this plug bonded to the wire?
I know the other option is to figure out some other direct connect or put in a new plug of some sort. Maybe even a secondary plug and leave the original to carry main power and ground wires.
I know the other option is to figure out some other direct connect or put in a new plug of some sort. Maybe even a secondary plug and leave the original to carry main power and ground wires.