Take a look at the seal kit for a 1978 model 70 HP.----Might be a good
Resealed lower unit. Installed new forward gear, clutch dog, reverse gear. Impeller all oem parts.. Cleaned oil pump, shift piston etc and reinstalled. New type C LU oil. Pressure test held.. When turning shaft w drill setup, cannot get to shift into neutral or reverse when applying 12 volts to appropriate solenoid wires. I can hear solenoids clicking.. the Oil pump was seated in w guide pin as it supposed to. All components replaced in proper sequence. All bolts torqued according to service manual. Any pointers to look at?