1971 18HP Evinrude Fastwin

[LindenLongRods]

deleted

I see where the white one goes , how do I get old one out? I can't see if old is even in there though and I put cap back already

 

[hardwater fisherman]

my carb kit comes with 3 little black o rings, and a white plastic piece, do I need them or where do they go? I realize the kit is universalView attachment 339330

The white piece is the needle valve bearing.

 

[hardwater fisherman]

The white piece is the needle valve bearing.

I carefully threaded a long wood screw into the old one and pulled it out Do not damage the casting if you try.

 

[LindenLongRods]

I carefully threaded a long wood screw into the old one and pulled it out Do not damage the casting if you try.

You're the best, got it using screw. Now just put new one in first before actual jet screw correct? I know stupid question also black O-Rings obsolete or don't need?

 

[hardwater fisherman]

You're the best, got it using screw. Now just put new one in first before actual jet screw correct? I know stupid question

I used the needle to seat the new one. I do not know if that is the way it is done but it worked for me.

 

[LindenLongRods]

I used the needle to seat the new one. I do not know if that is the way it is done but it worked for me.

Black o-rings? don't need?

 

[hardwater fisherman]

Black o-rings? don't need?

I am not sure what they are. Maybe for a different carb? I always seem to have extra pieces when doing carbs.

 

[JohnnyGuy]

my carb kit comes with 3 little black o rings, and a white plastic piece, do I need them or where do they go? I realize the kit is universalView attachment 339330

What kit did you buy?

 

[LindenLongRods]

What kit did you buy?

384413, it also came with plastic float, I stayed with the cork one it moved more freely