Hi guys, I've never posted before so I hope this is in the right place, anyways I bought an old alumacraft deep C and it came with a johnson 20 HP motor from 1968 and the previous owner said he never ran it in the two years he had it, I brought it home and it started right up, I replaced the impeller and lower unit oil and took it out and it ran great for a full day of fishing, the next time I took it out it wouldn't start, turns out there was a leaking gas line, so I replaced all the gas lines and put in a new kill switch, I took it out and it ran great for most of the day, towards the end of my fishing trip it made some sound almost like I hit something on the bottom of the river so I turned it off and pulled it up, and rowed away from where I was. When I started it back up and put it in the forward gear I could move forward but when I give it gas it will go a tiny bit faster and that anymore gas than that and it just sounds like I'm revving the engine, is this some sort of lower unit problem or is this a gear issue? Any ideas?