Chuck1947b
Recruit
Thread starter- Joined
- May 4, 2016
- Messages
- 3
I am wondering how the throttle works on the above engine. On mine there is a throttle shaft that the buttterfly moves/pivots on. On the outside end of this shaft is a device that is about 3/4" long . I don't know what it is called but it spins freely on the shaft. Don't know if it should or not. Seems if it were welded/fastened to the throttle shaft that it would open/close the butterfly?? Other than that I can see no way how the throttle butterfly opens or closes. The carb was in good shape but froze up and I wonder if someone forced the throttle and broke this mechanism loose from the throttle shaft??? Also I have only the top half of the carb off and was wondering if it would be a good idea to go ahead and remove the lower half and clean the reed valves also or do those seldome mess up.