1964 model

[RickyBobby48]

I have a 1964 Evinrude 18 hp Fastwin. Will a stator off a 1967 model work? Same everything except for the year model. Any help is greatly appreciated. Thanks in advance.

 

[saltchuckmatt]

I have a 1964 Evinrude 18 hp Fastwin. Will a stator off a 1967 model work? Same everything except for the year model. Any help is greatly appreciated. Thanks in advance.

They don't show a 67 18 HP....

Pretty sure they don't call that a stator too....what are you looking for, the coil?

 

[jimmbo]

In 67, they called it a 20 in the Johnson line, in the Evinrude line it was an 18. the Ignition systems are the same thru those years

 

[racerone]

This is an example of the wonderful interchangeability of the 22 cube models.-----Parts are everywhere, new and used.

 

[jimmbo]

Some Diligence has to be used, as mixing some parts will result in an Engine's Demise. Pistons, Rods, Cylinder Heads, and Crankshafts are different between the 18/20hp and the 25hp versions,

 

[racerone]

These motors were built for many years.----Lots of new and used parts can be found.----Yes , the novice has to do a wee bit of checking on part numbers.