Hi Everyone:
Brand new to this forum. I purchased a beauty of a boat from the original owner:
1958 Thompson Sea Skiff 2 mated with a 58 Johnson Super Sea Horse 35 hp engine.
The boat is in fantastic shape. The gentleman took excellent care of this craft. He winterized the engine and kept it inside during winters and it shows.
THe engine has not been run since 2015. It was winterized and has not been cranked since. I live in Maine and want to get it in the water this month(fresh water lakes- it came from Minnesota so it has only seen fresh water). As I dont have an engine log from the gentleman, what should I do before I hit the starter?
Caveats: I know nothing about engines especially these except the oil to gas ratio is 25:1 , use fresh gas, they are of the era where environmentally friendly means you have an ashtray in your boat instead of throwing your butts over the side and they are gas hogs.
Questions off the top of my head:
1) What do I do with the gas that is left in the tank?
2) Gas stabilizer for what reason?
3) Pull the plugs before trying to start and do I clean them with a wire brush or just replace for new?
4) What oil should I use/what octane gas for this 60 yr old engine?
5) What IS the gas consumption like on this engine in a 600 lbs boat?
6) WHat should I NOT do when running an engine this old? I am only using it weekends and it will not be docked but launched and garaged beteen uses/
7) Any tips for maintaining during the summer when it is not in use?
I know it is a long list but I want this boat to remain in good shape- it is only 4 years younger than myself!
Thank you
Justin Salerno
Brand new to this forum. I purchased a beauty of a boat from the original owner:
1958 Thompson Sea Skiff 2 mated with a 58 Johnson Super Sea Horse 35 hp engine.
The boat is in fantastic shape. The gentleman took excellent care of this craft. He winterized the engine and kept it inside during winters and it shows.
THe engine has not been run since 2015. It was winterized and has not been cranked since. I live in Maine and want to get it in the water this month(fresh water lakes- it came from Minnesota so it has only seen fresh water). As I dont have an engine log from the gentleman, what should I do before I hit the starter?
Caveats: I know nothing about engines especially these except the oil to gas ratio is 25:1 , use fresh gas, they are of the era where environmentally friendly means you have an ashtray in your boat instead of throwing your butts over the side and they are gas hogs.
Questions off the top of my head:
1) What do I do with the gas that is left in the tank?
2) Gas stabilizer for what reason?
3) Pull the plugs before trying to start and do I clean them with a wire brush or just replace for new?
4) What oil should I use/what octane gas for this 60 yr old engine?
5) What IS the gas consumption like on this engine in a 600 lbs boat?
6) WHat should I NOT do when running an engine this old? I am only using it weekends and it will not be docked but launched and garaged beteen uses/
7) Any tips for maintaining during the summer when it is not in use?
I know it is a long list but I want this boat to remain in good shape- it is only 4 years younger than myself!
Thank you
Justin Salerno