1953 15 horse

harp2822

Petty Officer 2nd Class
Joined
Jul 31, 2023
Messages
104
Almost started, then i could barely pull the rope. Turns out the woodruff key sheared off. Took it apart an as i put it back together, i broke the armature plate mounting ring. Anyone use a good source to get parts for the old guy?
Marine engine says the part number is 580168, but it keeps referencing the armature plate ,not the ring.
 

Attachments

  • 1712869409765232449429433476331.jpg
    1712869409765232449429433476331.jpg
    568.4 KB · Views: 7

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,722
That part was used for about 40 years on many motors.----Dime a dozen at many salvage places.----Your location.
 

harp2822

Petty Officer 2nd Class
Joined
Jul 31, 2023
Messages
104
Would you think it's the same part number through all those years ?
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,410
that plate only serves to hold down the mag plate itself . a few spot welds should fix it up finished with polishing the weld joints. not much stress on those
and yes that part is the same for years becasue the mag plates and the ignition system was used from the early 50s to early 70s.

if need be if thethreads get mess up at the wrld joint you can retap and use a helicoil

check in with the folks at AOMCI classifieds tons of deads motors around or vintageoutboard.com may have them
 

kbait

Commander
Joined
Nov 13, 2007
Messages
2,461
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,410

 
Last edited:

harp2822

Petty Officer 2nd Class
Joined
Jul 31, 2023
Messages
104
Both those pics show a key way slot in them, mine doesn't have that.
 
Top