i did some more work on it last weekend. motor still wasn't running right, i figured out it is simply dropping a cylinder at idle now. once both are firing i could run on plane no issue saturday.
sunday i put new plugs in and zip tied the spark plug wires back in place and it ran like crap. wouldn't hold rpm while running and would loose a cylinder at idle.
i planned on replacing the coil and wires next. coil number 584451is the oem number.
shows as obsolete. only used ones on ebay, i did find some replacement kit but they wanted $152 for the coil. most coils are 30-40, what gives?
the 2 stroke version of this motor uses a similar coil that is readily availible. anyone know what the difference is? i'm assuming the 2 stroke is hotter, higher voltage possibly. i wonder if i could alter the plug i run and use that coil.
my other thought is using one from lawnmower, since they are 4 stroke as well. i just worry about plugs and heat ranges.
i sent brp an email but i doubt they will help much.
anyone know the best way around this?
152 seems steep, it may not even be the problem.
anyone know the ohms to test the oem coil out?
i'm worried it may be the ignition module