115 sunbird sizzler,

chipley

Recruit
Thread starter
Joined
Feb 2, 2017
Messages
4
water in bottom starboard cylinder.replaced head gasket. water still in bottom cylinder. HELP!!!!!!
 

chipley

Recruit
Thread starter
Joined
Feb 2, 2017
Messages
4
thanks. when I replaced the head gasket, I hand turned the crank and water seemed to enter from exhaust ports
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Remove / inspect the exhaust covers.-----Saw that inner exhaust manifold cracked on one of these units.
 

Bosunsmate

Admiral
Joined
Apr 7, 2012
Messages
6,135
yes and put a straight edge on them to make sure they arent warped. Seen it myself
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
What / when / where did this water intrusion occur ?------Was motor running on a hose ?----Was hose running and motor stopped at any time ?
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
If the engine ever overheated, the manifolds may warp and not lie flat on the exhaust filler blocks . Water can enter there under pressure. Does the outer manifold need to be re-torqued?
 
Top