Search results

  1. G

    How to build a super heavy duty 6600lb trailer mover

    Hey Guys here's a video i made converting a direct drive mini mover 2 trailer mover to dual offroad wheels, i used 10mm and 16mm plate steel i welded it together with 2.4mm arc welding rods Its pushing a V19 fibreglass center console in the video around 4400lb up a 5 degree incline on light dry...
  2. G

    Force by Mercury 25hp firing order 1998

    Hi can someone tell me the firing order, force by mercury 25hp 1998 Also can someone tell me the pull start shaft bearing size looks like a needle roller bearing Thanks
  3. G

    Building a bracket for a 14 foot tinny

    I started welding up a bracket for my aluminium boat, the bracket is being made from 4mm aluminium plate New welder so i was getting a feel for it i had too little amps i was running at 135amps when i finish it off i'll bump it up to 160-170amps The bracket will hold a force by mercury 25hp 3...
  4. G

    Looking for Mercury 115hp EFI 4 Stroke ecm

    Anyone know where to find a mercury 115hp 4 stroke efi ECM 2007-2011 Need shipping to Australia cheers
  5. G

    So i built my own 21 foot aluminum boat trailer! pics\video inside

    an aussie build guys 130x80mm i beam, 76x76x6mm cross members, just needs bunks and winch post axles are temporary i was sent wrong size so had to extend them hydraulic trailer brakes are not installed untill i get new axles i beams are bent 8.1 degrees hence the long A frame to minimise the...
  6. G

    Galvanized Steel Jack Plates

    Hey guys checking in from Australia here, im looking to make a set of jack plates actually i have already made them from galvanized steel structual C 6 inch beam about 1/2 an inch thick trying to do it on the cheap as a 6 inch jack plate imported from the usa is about $650 if i buy local its...
  7. G

    Plywood composite outboard brackets

    Hey guys im doing a complete rebuild of a classic australian hull i'm actually doing the rebuild on an australian forum as well on iboats forum just wondering us aussies love our outboard brackets its the biggest thing since sliced bread downunder but there is no one methoid or plans on how to...
  8. G

    A long shot someone may know

    Hey guys i have a Mercury 90hp 2009 4 stroke EFI blown powerhead i have a powerhead off a 115hp 2011 4 stroke EFI identical powerheads but the run different camshafts will my 90hp run with the 115hp powerhead using the stock ECU? The cylinder head i have been told is tunnel bored do u think...
  9. G

    Mercury 4 Stroke 90hp 2009 EFI Powerhead search

    Hey Guys Anyone know of anyone in the US or Canada selling a power head for a Mercury 4 Stroke 90hp 2009 EFI ? trying to shop around for a good used fresh water model if possible possibly u know a shop parting out one of these engines?
  10. G

    We call it liquid nails down under

    I have seen you guys recommend using PU glue to glue down your stringers, here in Australia we call it "liquid nails" but we do have a special polyurethane construction adhesive, is this stuff ok to use on a 18ft boat or 5.7 meters?
  11. G

    WSM Rebuild Kit For E-Tec

    Hey Guys I know the USA is a bigger place than Australia so i thought i would ask on here, Has anyone successfully used WSM pistons in there rebuild kit on any E-Tec or FICHT engine? like to hear of people who are or have as i am rebuilding a 130hp E-Tec that cold seized and threw a rod, the...
  12. G

    Any pics or plans for bolted aluminium trailers?

    Hey guys does anyone have any pictures or plants maybe even advice on a diy bolt together aluminium trailer? need to haul a 18 foot glass boat, trailer needs to be dual axle thanks
  13. G

    Free Boat, This thing is a badboy!

    Scored a free boat i am picking up in a few days i however am paying 1k for the trailer, the boat has been gutted and most of the stringers are gone or extremely rotted looks to have had someone play around with the boat someone has torn up the floor for a possible rebuild and left it at that...
  14. G

    was this model ever sold in the USA?

    just wondering if those model yamaha 25hp 2004 was ever sold in the US? looking for a microfiche as we need a crankshaft thanks
  15. G

    mercury 25hp 4 stroke blowing bubble

    i have a mercury 25hp 4 stroke 2000 model when i run the engine in my drum at idle i get a lot of exhaust coming out of the prop i checked on youtube for the same models and everyone elses engine of the same model dont blow any bubbles out of the prop is mine normal...
  16. G

    water passage blocked with silicone

    i have a DT30 suzuki 1985 model i just bought the owner said it wasnt pumping water i removed the power head and the pipe connecting to the water pump was blocked so my question is if the reservoir in the picture is half filled (filled up to the lowest piece of the pipe) will this stop a...
  17. G

    Mercury 25HP Bigfoot 2000 Model Gasket Question

    can someone please help me out im looking for a aftermarket powerhead gasket kit for a mercury 25hp bigfoot 2000 model even just the sierra part number will do cheers
  18. G

    looking for suzuki DT3.5 parts

    does anyone know of where i can purchase a propeller and impeller kit for a suzuki DT3.5 two stroke 3.5hp
  19. G

    starting an old evinrude

    i have a 1972 50hp evinrude im having trouble everytime i goto the boat ramp i need to pour a small amount of fuel down each carb's before the engine will start once i pour the fuel down the carb's the engines runs flawlessly i often start the engine at the boat ramp and turn it off there after...
  20. G

    replaced lower unit seal

    i had water leaking into my lower unit through the drive shaft bearing assy the outer O'ring was the cause im just wondering if i can idle the motor in a bucket of water for a period of time to see if the seal is still leaking or will i need to actually run the motor up to certain speeds to...
Top