Search results

  1. T

    2003 lx225 OX66 knocking sound

    I put a fuel pressure gauge on it and while idling it reads 35 psi ,At 2400 rpm.it reads 36 psi and then dies, still has 36 psi when dead, I drained the vst and there was 12.5 ounces of fuel in it. It did not help when pumping the primer bulb, it still dies
  2. T

    2003 lx225 OX66 knocking sound

    update on my 225, I swapped out another powerhead because I could not determine what was wrong with the original one. This powerhead has 100 psi on all 6 cylinders. It starts and runs fine up to 2500 rpm, then it shuts off, like turning off the key. It starts back up instantly, will run great...
  3. T

    2003 lx225 OX66 knocking sound

    all pistons, bearings have just been replaced, I even took the motor back apart and checked everything again. I can not find anything out of spec . I put it back together and nothing changed. I did put a borescope inside cylinder and everything looks as it should . The piston is tight, makes no...
  4. T

    2003 lx225 OX66 knocking sound

    I can hear a slight knocking sound in #6 cylinder when turning the motor over with the starter and the spark plug installed. A Remove the spark plug and the knock goes away. I have tried all of the other cylinders and it only occurs when the plug is installed in # 6 . Any thoughts about the...
  5. T

    Using hose flush to cool engine.

    It will work for idle speed only without hurting the water pump. It does get a small amount of water to the pump, dont rev it up, only idle
  6. T

    Tnt is giving me the fits how much does a 98 225 ox66 hold in it's resivouir

    mine took a full qt of dextron II when I drained it completely
Top