Search results

  1. B

    2008 90TRL need more power!

    I have a 90TRL on my 17ft seahunt. The boat can get up to plain ok but i can only get my RPMs to 3800 MAX. Good compression on all 3 cylinders. What can i do to get full power out of this motor? change propeller? Trim tabs?
  2. B

    Yamaha 08 2 stroke 90TLR low compression

    Hello, i have had this motor for a year now and it runs and sounds ok but checking compression the readings were 75psi on all 3 cylinders. Just wanted to point out that i have a cheap compression tester that i got from a friend so hopefully the numbers are higher. I have read that doin a decarb...
  3. B

    2008 Yamaha 90TLR fuel filter

    I have an external fuel tank that i am using with this motor and i want to install an in line fuel filter but just want to make sure this one is ok to use with my motor and wont restrict fuel flow. https://www.amazon.com/gp/product/B0090R6DG4/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
  4. B

    Inboard fuel tank clogged filters and pickup tube

    I have a new Yamaha motor but older boat and fuel tank. Replaced fuel lines filters water separator and primer bulb but there is a lot of gunk and sediment in the bottom of tank that is clogging pick up tube and filters once I have it on the water. What is the best way to clean this out is there...
  5. B

    New fuel lines on inboard tank cannot prime!

    Just bought new motor and flushed out inboard gas tank and replaced fuel lines. I have a new primer bulb but cannot prime the fuel lines it just keeps pumping and pumping any tricks I can try?
  6. B

    Yamaha 90TRL propeller issue

    I recently purchased this 2008 motor and the cotter pin that locks the nut for the prop has rusted out and i cannot get it off. I have tried pentrating oil and tapping with a punch but i dont want to over do it. What is the best was to remove this so i can install new one without damaging...
  7. B

    2008 yamaha motor key switch won’t alarm

    Just purchase brand new single engine key switch and after hooking everything up and am now getting any buzzer when key on and no buzzer when kill switch is pulled. Motor starts when key turned over. Could this be a defective key switch?
  8. B

    Yamaha 2008 90TLR oil injection

    I just purchased this motor. 105 compression on all cylinders. Are these readings low? Also i am new to these oil injection systems. How reliable are these? I am tempted to bypass and used pre mixed fuel.
  9. B

    1998 Johnson 90HP (J90TSLECM) voltage too high!!!

    Hello, I have a question about my model J90TSLECM johnson motor. I took the boat out for the first time and noticed that the voltage when from 12V at idle to near 16V at faster speeds. Any ideas on how to fix thing?!?! Thanks
  10. B

    Johnson 90hp alarm buzzer

    Hello, I am trying to install the alarm buzzer for my johnson motor (J90TSLECM). When i bought this boat there is no alarm boot sequence when i turn the key so i noticed it was never installed. Can somebody please help me find the correct part number and how to wire it up to the ignition. Thanks!
  11. B

    98 Johnson 90hp tilt and trim not working

    Hello I have a model J90TSLECM and the tilt and trim motor works great from the switch on the motor but will not work from throttle switch OR when I try to jumper the 3 wire plug and harness coming from the relays. Could this be a problem with the relays even though it’s works on the motor switch?
  12. B

    98 Johnson 2 stroke ignition

    Hello, i am trying to wire up an igniton for my 2 stoke and i cant find a diagram anywhere for it. It is a model J90TSLECM. Thanks.
  13. B

    1999 johnson 90 hp main in line fuse

    My 2 stroke outboard that I bought is missing the fuse for the main in line starter and power tilt and trim. Can anybody tell me the specs on with fuse to install???
Top