Search results

  1. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Ooops, sorry I just re-read your previous reply that the other two wires in the.plug were for a trim gauge.
  2. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    I finally got the correct wiring size and shrink tubing connectors and wired in. Works great. Any reason to be concerned about the "tan or black" lead in the 5 pin connector on the motor, which I believe tan wire is to ground? Thanks for your help. I'm glad I didn't get paid by the hour to...
  3. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    I'll let you know how it works out
  4. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Oh yeah , guess I can cut the connector plug off in the motor, but it's already grounded, so I might be better off trying to find pins
  5. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Yeah I can do that, unfortunately they're aren't a lot of radio shack stores to get the exact connectors that would fit easily. What do you think about wiring in series downstream of the motor tilt switch?
  6. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Ahhhhhh This might be key to the color coding pinouts
  7. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    That first picture above shows the only plug in at motor with 5 pin outs and wire colors I'm sure are for the trim switch. What color wire would go in the correct pin? On another thought...and I don't care if the motor remote switch works if the one on the control box does. Do you think I could...
  8. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Soooo. There supposed to be another harness between here and somewhere on the motor? Am I missing a wiring harness?
  9. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    This one ?
  10. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Are these connectors used for the tilt function from the control box?
  11. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    Because I started chasing why nothing was connected to the 3 prong connector.
  12. T

    1995 Johnson 40 HP J40TLEOD control box tilt and trim

    What / Where is the power source of the control box tilt and trim? The tilt switch does not "work" (remote at the motor works), when I traced the wiring harness, it ends with a 3 prong plug, not connected to anything. I've read where power to the tilt n trim motor comes from the start solenoid...
Top