Search results

  1. J

    Winterization Question

    Thanks fellas, I’ve been meaning to run power out to the “boat house” (carport) for a while now, guess this gives me an excuse to get it done asap.
  2. J

    Winterization Question

    Hi All, I live in the PNW where we have relatively mild winters but it does freeze from time to time, with a few weeks a year where we’ll have a cold snap with 3-4 days of sub-freezing temp days in a row. My engine is freshly rebuilt (16 hours now) and I’m hoping to squeeze a few more...
  3. J

    5.0GL-C won’t get on plane

    For the record the distributor with the faulty ignition module was this one...
  4. J

    5.0GL-C won’t get on plane

    A new ignition module fixed the problem folks. I ended up getting a Sierra Marine ignition module and installing it in the distributor I got from Amazon and now everything is working fine. I checked the timing advance with the old module and no matter how I set the base timing it always seemed...
  5. J

    5.0GL-C won’t get on plane

    Agreed but the module came with the dizzy so I’m going to buy the exact same one and return this one if it fixes the problem.
  6. J

    5.0GL-C won’t get on plane

    Ok so I replaced the fuel pump and did all the fuel system tests and everything seems to be in order on the fuel system side. I cleaned the screen on the carb inlet (looked clean) blew out the fuel line and the fuel tank vent line and there are no restrictions or obstructions. The fuel filter is...
  7. J

    5.0GL-C won’t get on plane

    That’s a big help, thanks. My buddy just asked me if I’d checked the tank vent yet and mentioned the mud dauber nest thing. I haven’t checked that yet and I think it will be the first thing I do tomorrow when I get home. I’ve had them make nests in the “pee line” on my kicker motor before and...
  8. J

    5.0GL-C won’t get on plane

    Yeah, it’s a Holley 2 barrel. The screen in the carb inlet was changed during the rebuild but it’s probably clogged again now. I have no idea how I would check the anti-siphon valve or fuel tank pickup tube screen as the tank is below deck and inaccessible. It’s like they put the tank in first...
  9. J

    5.0GL-C won’t get on plane

    Yeah, I replaced that little mesh filter as part of the carb rebuild but I didn’t get a good look at it yesterday, maybe I should pull the carb and give it another thorough going through before proceeding further.
  10. J

    5.0GL-C won’t get on plane

    Ok, another new development. I still don’t have anyone to help but when I got home from work I tried starting it again and still no good. I pulled the fuel filter and it was about half full. I pulled the line off the carb and it was dry, then I pulled it from the fuel pump side and it sort of...
  11. J

    5.0GL-C won’t get on plane

    Yes, everything in the carb was cleaned/replaced EXCEPT the 2 little cork washers for the idle mixture screws. My rebuild kit was missing them so I left them alone and didn’t back them out since I was worried the washers would fall apart and I’d have nothing to replace them with.
  12. J

    5.0GL-C won’t get on plane

    I’m solo so I can’t hear or feel the pump while I’m cranking, the fuse is good. I’ll have help on Monday which is when the pump is supposed to come so I’ll have someone to crank while I check.
  13. J

    5.0GL-C won’t get on plane

    Well interesting development, I went out to work through these troubleshooting steps and it wouldn’t start. It fired up for a second and then stalled and then wouldn’t restart at all. The only thing I had done so far was to replace the fuel filter and the new filter still looks dry so now I’m...
  14. J

    5.0GL-C won’t get on plane

    Thanks, sounds like I’ve got my troubleshooting plan for the day!
  15. J

    5.0GL-C won’t get on plane

    Thanks for all the replies. I changed the fuel filter last night and drained the old one and the gas looked perfect, no water and no debris. Thank you for the advance curve info alldodge, I’m going to check that next. My gut is telling me it’s the electronic advance on the distributor, even...
  16. J

    5.0GL-C won’t get on plane

    Hi all, Freshly rebuilt 5.0GL-C in a 22’ cuddy cabin walk-around starts up and runs like a dream in the driveway, but won’t go above 2600 RPM when in the water. She hesitates a little coming off idle but then revs up but just falls on her face between 2,000-2,600. Sometimes it’ll backfire and...
  17. J

    Leftover parts…

    Turns out it was a spacer bushing for my aftermarket heat exchanger bracket. For the sake of the archive it was an Orca Marine #500577, I've attached the instruction manual below which has photos in case someone else comes across this issue.... disregard apparently the file is too large to...
  18. J

    5.0GL-C Crank Position Sensor

    Hilarious, I should have checked before I went and bought a replacement... My old front cover had one and the VP replacement had the hole for it so I figured it must have been plugged into something... Should have saved the $75 and just fabbed up a block off plate. Thanks for the info!
  19. J

    5.0GL-C Crank Position Sensor

    Hi All, I was curious to know if anyone understands the purpose of the Crank Position Sensor on the 5.0GL-C? I found a wiring diagram for this engine elsewhere on this forum and it does not show the crank position sensor being attached in anyway to the wiring harness, and even on the VP Parts...
  20. J

    Fresh water cooled system radiator cap PSI

    Thank you, I saw some old data that said as low as 4-7, which seemed wrong also
Top