Search results

  1. dlogvine

    2000 Yamaha xl800 Waverunner power valve servo motor repair

  2. dlogvine

    1995 kawasaki 750 super sport no spark

    Jetski has a good compression, about 120psi on both cylinders. Cranks fine, but im getting a single spark and nothing after. Changed the stator, still the same issue. This time the stator is used Kawasaki original. Mechanic said the ebox is good. I'm running out of ideas.
  3. dlogvine

    Aftermarket stator for 1998 kawasaki 750 xi super sport

    I am trying to get this jet ski to run. Original magneto had 2 wires green and purple coming to the cdi unit. Several replacement CDI units that came with this jet ski as well as the ones i saw online had 4 wires. So i decided to change the stator to match CDI unit. However, i got an aftermarket...
  4. dlogvine

    1998 Kawasaki 750 sxi no power

  5. dlogvine

    1995 Kawasaki SS rough idle

    I just purchased a pair of jetskies. Technically one 1995 Kawasaki SS jetski with a 750cc engine and the other PWC is 1995 Yamaha Waveraider 1100. Later is running like a beast and has no issues, but Kawasaki has a problem with idle or low gas running. It chokes and feels like a strange push...
  6. dlogvine

    Jet ski title in Nevada

    Im thinking about buying a jet ski in Nevada, but am not sure what are the title laws there. In Arizona it is just a Game and Fish Department registration part for any boat or PWC. In other states the rules are different so im kinda concerned as to what to look for. The seller showed this, but i...
  7. dlogvine

    Jet ski trailer 5.30-12 tire upgrade to 205 75 14 fail

    I just bought a pair of jetskies on a nice aluminum trailer that i would love to keep. Original wheels are 5.30-12 and they are old and cracked. The hub is 4.5-5 and my set of 14" wheels with nice and new Carlisle tires fit the hole pattern. Unfortunately, the width of these tires make them rub...
  8. dlogvine

    1994 SeaDoo XP choking when starting in water

    Join DateJun 2020Posts28 1994 Seadoo XP carburator linkage setting
  9. dlogvine

    Quick guide for making a new seat cover and replacement of an old one piece PWC seatcover

    You can try to do the seat cover replacement on your own. Most of the older jetskies with one peace cover require only few simple steps: 1. Remove the old cover, you have to get a staple remover or struggle with a screwdriver or other tool that would do the job. Staple remover is definitely a...
  10. dlogvine

    Bravo 2 outdrive not engaging when in gear

    I promised my friend to help him replace the impeller in his water pump on Mercruiser 7.4 engine with Bravo 2 outdrive. Told him not to do anything until i come, but when i arrived, the driveway was knee deep in gear lube and the lower unit was for some reason unbolted and laying in a puddle of...
  11. dlogvine

    1993 Polaris SL750 no spark

    I just got an old polaris 1993 sl750 free with a trailer purchase. First thing we checked was compression and one of the pistons was dead with a big hole in it, i think it was #1. So i did replace the pison, honed the cylinder, assembled the whole thing. The worst part was an idiotic separator...
  12. dlogvine

    Kawasaki 900 zxi ,Top unit installation, piston rings keep slipping

    Ive been trying to put a top unit of the Kawasaki 900zxi engine and had a really hard time with getting the second piston on. The rings are getting pushed down and dislodged, pistons are moving and getting misaligned. We tried to do it with my friend, but seems like the pistons should be first...
  13. dlogvine

    1994 SeaDoo SPi possible bad fuel problem

    I bought a 1994 Seadoo SPi. It was starting and running when I was testing it and afterwards every time I started it in the storage. Inside of th he engine compartment fuel smelled old, but I thought it wont be much of a problem since I was going to mix it with the high octane new fuel and use...
  14. dlogvine

    Kawasaki 900 ZXI oil pump hoses

    Looks like the old oil injector hoses from the oil pump to the cylinders are way too worn out and one is missing. What is the best place to look for the hoses of that type. Automotive stores dont carry them. Should I try motorcycle shops or the ATV/jetski dealership? Thank you
  15. dlogvine

    Pre alpha outdrive and gimbal fitting

    My friend decided to restore a boat and he has a 3L 4 cylinder Mercruiser engine. It is 1990 or 91 so it was originally with Alpha one gen 1 outdrive and an old coupler. I found him a pre alpha outdrive with gimbal and trim tabs, but not sure if it will fit. Also im not sure how we can check out...
  16. dlogvine

    1994 Sea Doo 650 kill switch button plastic top

    Im looking for 1994 Sea Doo 650 kill switch button plastic top. Just bought this jetski but button is missing and kill switch key has nothing to latch on. Tried to find it on ebay or amazon, cant find anything. Anybody knows of any place online or any jet ski place in Arizona? Thank you very much
  17. dlogvine

    New Ujoint bellow and old gimbal bearing

    I am looking at replacement of the U-joint bellow and a gimbal bearing. I wonder if I can use one of the cheaper bellows from Ebay or Amazon or should i go with a brand name? As for the bearing replacement I have one that I took out from the gimbal a year ago, but it is spinning freely, no...
  18. dlogvine

    Alpha One gen2 gimbal bearing failure?

    I took my 1998 Ebbtide Campione with 5.0L Mercruiser and Alpha one gen2 outdrive. At first there was some unusual rumbling noise but not very loud when I started the engine, but it subsided when I got to higher rpms and until an hour later the engine was running fine. Part of this time we were...
  19. dlogvine

    Where can I get stud mount trailer marker lights?

    I am trying to fix the lightning on the 1996 trailer I just bought and after changing the wiring I discovered that several side stud mounted marker lights are not working. I tried to find them on ebay or amazon but looks like they are older style and nobody carries them. they are rectangular...
  20. dlogvine

    Removing Alpha One gen 2 gimbal housing transom assembly

    I purchased a junk boat with a nice alpha one gen 2 outdrive and seized 5.7L v8 engine. Just wanted to remove the the good parts and give the rest of the hull for free to anybody who needs it. Disassembly was pretty easy and I did it before but when I removed the outdrive, transom plate and...
Top