Search results

  1. R

    Mecury Black Max 175, which year?

    The plate of the Serial Number was missed. Here is the casting number on the block. It was located on the port side on the front section of the block assembly 969-9078-C3 Top bearing housing 1159-9642-C HOUSING, Driveshaft - Black - X-Long (#3503-813563-C) Anybody know the year of this...
  2. R

    Johnson 115 HP TurboJet, what's the part number?

    Re: Johnson 115 HP TurboJet, what's the part number? Could not model number. Here is another picture for your reference: Thanks!
  3. R

    Johnson 115 HP TurboJet, what's the part number?

    Please see attached pictures A piece of metal / aluminum (located at lower port side inside exhaust manifold) was melt / broken. Can anybody tell me the name & part number for this item? I don't know the year of the engine exactly, but likely, it's 1995. Thanks in advance!:)
  4. R

    Small hole on Mariner 6HP Carburetor Top

    This carburetor is from a 1999 Mariner 6 HP. It won't start. After carefully check all around, we found a small hole on its top side. Please see attached pictures for reference. What is purpose for this small hole? Is it normal or a defective carb body? Any idea would be greatly appreciated.
  5. R

    80HP Mercury Low Compression, Burned Piston Rings

    S/N: 7134777 120 PSI on cylinder #1, #2, #4 only 10 PSI on cylinder #3 After open the powerhead, we can see #3 piston burned and the rings stuck on it, part of the ring missed.
  6. R

    6 HP Evinrude outboard won't start, 60 psi low Compression?

    Re: 6 HP Evinrude outboard won't start, 60 psi low Compression? After pull from the fly wheel few times, the motor starts to run. But it runs roughly and won't stay on idle. Checked the fuel pump, it seems a small spring is missed. There should have 2 springs in side the pump, but only 1 in...
  7. R

    6 HP Evinrude outboard won't start, 60 psi low Compression?

    Hi all, A friend has asked me to look at his 6hp 2 stroke which won't start. This motor running good last year, but just won't start now after a few months storage. Model: 6803C Spark: ok Compression seems low only 60 psi on both cylinders. What should the compression be?
  8. R

    Anybody know this Chrysler outboard?

    Re: Anybody know this Chrysler outboard? So, we need to change/replace/fix the Forward Gears / Backward Gears and Clutch Dog. In Toronto Canada, the price would be $1000+!!!:( Which is more expensive than an used boat+motor:facepalm: So, we decided to repair / Sharpening the wear jaws. My...
  9. R

    Anybody know this Chrysler outboard?

    Re: Anybody know this Chrysler outboard? Forward gear clutch jaws: excessive wear
  10. R

    Anybody know this Chrysler outboard?

    Re: Anybody know this Chrysler outboard? Here is a picture for the Gears. We can see clearly the Clutch jaws are rounded.
  11. R

    Anybody know this Chrysler outboard?

    Re: Anybody know this Chrysler outboard? Thanks all the replies for the great helpful information. When removed the flywheel, I found the KEY was broken to 3 pieces (please refer attached pictures). That's probably the reason why the engine doesn't work. So, now, we need these items: 1. the KEY...
  12. R

    Anybody know this Chrysler outboard?

    Re: Anybody know this Chrysler outboard? Thanks a lot for the information! The engine doesn't start, occasionally it generates a big sound like bomb explosion. Checked: 1. Spark ------ good 2. Fuel delivery ------ good 3. Compression ------ up: 120PSI Low: 110 PSI Likely, the CYLINDER HEAD...
  13. R

    Anybody know this Chrysler outboard?

    Hello, was hoping some one could help me on an old Chrysler Outboard. The Model number is 4556, and the Serial Number is 1061. It stopped working last time on the lake and cannot start anymore. Does any one know the Year of it? Any help would be greatly appreciated. Thanks
Top