Search results

  1. H

    1991 125, pictures and couple questions.

    Howdy, my next project is getting an outboard onto a 15' Boston Whaler Rage (OMC turd jet drive boat). A few people have used a jack plate and installed a 50, 75 HP outboard, I want to install a swim-platform bracket with flotation and a 4-cyl inline mercury. Found this on CL (for parts or...
  2. H

    1994 200HP lower motor mount replacement without pulling powerhead?

    Howdy all, At the end of last boating season I noticed my 1994 200HP 2.5L engine would appear to tilt back a bit under acceleration, I had someone else take the helm and I watched the engine while accelerating. The top does not move back, but the lower portion of the engine pushes towards the...
  3. H

    What is 1995 115 HP Mariner worth?

    What kind of used market do these have? It looks to be in very nice shape. Seller is asking $2,600 with controls. http://newyork.craigslist.org/lgi/boa/2625173913.html Thanks, John
  4. H

    Going to look at 115 1989 Mariner... opinions?

    There is a 1989 Mariner 115HP motor for sale, seller is asking $1,175, says compression is 120 on all cylinders and will demonstrate for me. Any opinions about this year, model? I am fairly new to Mercury's but, but a fan already... the 1994 200HP 2.5L I got earlier this spring has been...
  5. H

    Why do Merc's have a bad rep?

    This is my first Merc, runs great, but get some comments like: "What's black and doesn't work?... a Merc" "Nice black anchor" Maybe kind of like a Ford/Dodge/Chevy thing. :confused: :confused:
  6. H

    1994 200HP full throttle is only 2,500 RPM

    OK, so I took the boat out for the first time today (with 200HP I bought used... sat for couple years prior). Idles GREAT, no throttle needed to start, nice and responsive right up to 2,500 RPM under load where it goes no further. I did get it to hit 4,000 around a turn where it stayed for a...
  7. H

    1994 200HP high voltage? (16V +), also constant buzzer (temp sensor)

    Got my [new to me] outboard running with everything hooked up and ran for a while. The voltage seems high (16+ volts), is this likely the voltage regulator? There is also a constant buzzer (engine temp sensor?). Heads are cool, going to change thermostats. Thanks, John :cool:
  8. H

    How much is 80HP 1972 Merc outboard worth (used one year, stored since)?

    A friend of mine has an 80HP Merc outboard he purchased new in 1972, used one year, then pickled it, been in his garage ever since. Trying to help him clean up I suggested he sell it, then thought it would be fun to put on a small boat (hulls should be easy to find). He told me to research...
  9. H

    What fast hull for 80HP outboard?

    Hello everyone, a friend of mine has a 1972 Mercury 80HP outboard, long shaft, which he purchased new, used one season, then put away. He mentioned selling it, was thinking I could put it on something as a zip-around boat (maybe two-seater, 15'?). There should be plenty of engine-less hulls...
  10. H

    Rebuilding 1994 200HP carbs, any tips?

    Howdy all, I picked up a 200HP 1994 outboard that was winterised a number of years ago. I got it to start and run, decided to rebuild the carbs for PM and to make sure everything is clean. Took them off and one apart today. There are a lot more threaded brass inserts to unscrew than other...
  11. H

    Can I sand/polish the gold off my "rocket launchers"

    I bought a boat with a alum/fiberglass top with 4 fishing rod holders welded to the bare alum. framework that are bright GOLD. They don't really fit in, is this gold just on the surface, thinking about sanding/polishing it to alum like the rest of the framework. :confused: Thanks, John :)
  12. H

    Gauge wire for dual batteries.

    I got a couple DP24's for my 1995 22' Angler Cuddy Walkaround. The single battery resides at the stern, I want to put this new pair in the bait wells, to get some weight up front and give me a place to put the two. My plan is to attach two cables to the output of the switch, one heavy gauge to...
  13. H

    Fuel spilling out of 1 carb (1986 175HP)

    Fuel is spilling out of one carb on my 175HP engine. It spills out when I get the engine running (tough to do as it is being flooded), and when the primer bulb is pumped a lot. Suspecting the float, I pulled the carb and everything looks fine (when I turn it upside down and try to blow in it I...
  14. H

    1994 200HP Blackmax pickled for 5 years, any tips to start?

    I bought a 1994 200HP Mercury Blackmax Offshore. The engine was very well taken care of and has nearly no exterior corrosion that I can see. This evening I mounted it to my boat (where 1996 175 Offshore was), plan to connect power/fuel/oil lines later this week. What should I do to prep it...
  15. H

    Swapping 1994 200 in place of a 1997 175, is harness plug and play?

    Are wiring harnesses the same between 1994 (or 1993, not sure of exact year), and 1997 2.5L outboards? Thanks, John
  16. H

    Block date stamp is 10-11-93 Is it a 1993 or 1994 model?

    I just picked up a Black Max 200HP, the serial number is faded off the sticker, but the block date is late 1993. Any idea what year the engine is?
  17. H

    Cutting a door under seats for battery relocation?

    Howdy, I am the new owner of a 1995 Angler 22' WA. There is a single battery at the stern starboard side box, the port side has the oil tank for the engine. Last week I got a couple group 24 DP batteries that I would like to install up front (to keep the stern light) somewhere. There appears...
  18. H

    1997, 175 HP Offshore 2.5. Overheated, pulled powerhead, what to do?

    Hello everyone, this is my first post here, purchased this 22' Angler WA from a friend who was the original owner, he overheated the engine last season. I stopped at the boat yard where the boat was stored and had a 30+ minute talk with the very nice mechanic there, who told me cylinder scoring...
Top