Search results

  1. joeturse

    1994 Sunbird 17' Bowrider

    Can anyone tell me what motor this boat takes? .20" or 25" Thanks Joe
  2. joeturse

    01 150 Ocean Pro Siezed

    Running in the other day it siezed up.No oil or overheat warning at all.At home we pulled the plugs and dumped WD40 down each cylinder to free it up, and got it to turn over.It would start and run(real rough)for a few seconds. What is your opinion,is the powerhead toast.
  3. joeturse

    2 Micron Filter

    I have a 2001 Johnson 150.Changed the Racor filter with a 2 micron.Runs fine except for low speed,it stalls out.Could the 2 micron cause a fuel flow problem?
  4. joeturse

    Trim stuck up

    When I trim my 150 all the way up,it seems to get stuck.After trying a few times it will let loose and come down. Anyone have this problem?
  5. joeturse

    Need a Trim Cylinder End Cap

    Need an end cap on the trim cylinder on my 2001 150 Johnson. Just taking a shot,you never know.Maybe someone parting an engine out.
  6. joeturse

    Stuck Throttle Plate

    I have a 2001 150 Johnson that has a stuck throttle plate.It is the bottom plate on the starboard side.All the other plates move freely. Anyone have this problem.
  7. joeturse

    Motor Swap

    I have a 2001 Johnson 150 OceanPro.The boat has an 1990 Evinrude 155 Commercial Engine on it now. I want to put the OceanPro on it.Anyone know if there are any issues doing this?
  8. joeturse

    Overweight Robalo

    Weighed my 1980 20ft CC Robalo yesterday,and she is almost 900 lbs over the listed weight. The boat is listed at 2130,and the trailer at 575.She weighed 3600:eek:.I was told that Robalo has closed cell foam,and will not retain water. Anyone have any experience with this boat?
  9. joeturse

    Transom Repair Part 2

    Poured my transom with Nida Bond yesterday,and it went well.Here are some pics of the pour. http://s810.photobucket.com/albums/zz29/joeturse/
  10. joeturse

    Transom Repair Part 1

    Here are a few pics of my day saturday.The chain saw if used with care,is easier than I thought. Plan on using NIDA-BOND POURABLE TRANSOM COMPOUND for the rebuild.
  11. joeturse

    Winterizing Motor on Stand

    Removed my OceanPro 150 to work on the transom.Now it looks like it is going to spend the winter on the motor stand. I used sta bil in the gas the last time it ran,so that should be ok.I was thinking of removing the plugs and injecting oil into cylinders,and then turning the motor over. Other...
  12. joeturse

    Transom Clean Out

    Doing a transom job on a 1980 Robalo.Any tips on tools to use to clear out rotted wood. I plan on using Nida-Core transom compound for the rebuild. Thanks Joe
  13. joeturse

    Nida-bond Pourable Transom Compound

    Plan on redoing my transom.Has anyone used Nida Bond.
  14. joeturse

    2001 Factory Manual

    Ordered factory service manual for my 2001 Oceanpro 150.The manual I received is for 2000 models.I called my dealer and he said that 2001 is the year Johnson went out of business(guess he meant sold)and this is the manual I had to use. Anyone know if this is correct?
  15. joeturse

    What would you do?

    I have a 1980 20ft CC Robalo,with a 2001 Johnson Oceanpro 150 on it.Here is my deal.Opened up floor hatch to replace the tank,and found out the boat is waterlogged.:mad:Here are a couple of pics.
  16. joeturse

    Remove Motor Help

    I have a 2001 Johnson Oceanpro 150 that I need to remove from the boat.I have an engine hoist to do the job.What I need to know is where to connect to pull the engine. Thanks Joe
  17. joeturse

    Model # Explain

    My model # is J150VLSIG Anyone know what the G indicates.
Top