Search results

  1. Fester

    Plugging Baitwell Exhaust

    I need a way to plug the fron baitwell exhaust. The drain plugs are in the back but I believe that the exhaust is in the front. We have a leak in the boat and think it is coming from within the hoses connecting the baitwell exhaust. The only plugs I have found that do this are the large...
  2. Fester

    Dead Mercury 115 - NEED HELP

    I have a 1985 Mercury 115 Inline 6 with tilt / trim. The lower portion of the block was submerged for 1 day 5 weeks before I bought it. The pistons move freely and I replaced the 2 tilt / trim solenoids and starter solenoid. Being new to fixing these I made a huge mistake and wired the...
  3. Fester

    Mercury Ignition Wiring

    I am atttempting to rewire a new ignition for a Mercury 115 w/ tilt / trim. The replacement ignition that I received has 6 posts A M M I B C But the SELOC book states that it is supposed to plug into A M M S B C I have an "I" instead of the "S" is this interchangeable? Also, There are 2...
  4. Fester

    Mercury 115 Idle

    I am new to boating and keep hearing about increasing the RPMs while in neutral. I do not understand this. It appears that the throttle when moved forward engages the prop and puts it in gear. What am I missing? Also, I am getting ready to crank up the motor for testing for the 1st time in...
  5. Fester

    Little Black Box?

    I am having problems with my tilt and trim.....when I hook it up it just clicks one time up or down....I was told that I have to check for proper coltage...done and fine....then I was told that I need to bypass the solienoids and plug directly to the battery to see if the solenoid is defective...
  6. Fester

    Please Verify My Wiring Diagram

    I have completely ripped out all of the wiring in my "new" boat and looking to rewire EVERYTHING. I have never done this before and want to verify that I am going about this the correct way. Can someone....anyone, tell me whether this diagram is correct, and if not...tell me what I need to...
  7. Fester

    Complete Rewire 84 Glasstream

    I just purchased a 1984 Glasstream 17' bass boat with a 115 Mercury Inline 6. The motor wiring harness looks to be in good shape but the accessories wiring is completely shot. I am looking to strip out all existing wire and replace it. The person who owned the boat before me did all of the...
  8. Fester

    Tilt and Trim Clicking

    My tilt and trim is not working. It just clicks one time when I press up or down and does not work....any suggestions or ideas? It is a 1985 Mercury 115hp 2-stroke
  9. Fester

    Saltwater in Gas Tank

    I need to know if there is something I can add or clean / wash out the tank with that will eliminate the possibility of corrosion due to saltwater in the tank. It currently has 10+ gallons of saltwater in the tank and I am pumping it out tonight and cleaning the outside of the tank. Can anyone...
  10. Fester

    Submerged 1985 Mercury 115

    I recently purchased a 1985 Mercury 115hp motor that was attached to a boat that was submerged completely for 2 days in saltwater. The motor itself had the entire lower unit and 4 inches of the powerhead submerged. All of the plugs look perfect except the very bottom one. There is a generous...
  11. Fester

    Help identifying 1984 Glasstream model

    I just purchased a 1984 Glasstream 17 ft bass boat and need some help finding out which exact model it is. Can anyone help with telling what , if anything on this hull or paperwork will tell me?
  12. Fester

    1952 Impeller ?? With Pictures

    Please look below to see a few questions I have about replacing the impeller in a 1952 Evinrude Fleetwin 7.5HP. I had a horrible discovery when I opened the motor and there was not impeller to begin with so I had nothing to compare the new one to. #1 There is a notch on both the impeller...
  13. Fester

    1952 Fleetwin Impeller ? for Chinewalker

    I have a question regarding sanding down the 18-3001 impeller for the 1952 7.5 Fleetwin. I see that it has a solid brass bushing in the middle and wanted to know if there will be a need to sand that down as well or if I will be able to get it thin enough to fit without touching it. Alo, how...
  14. Fester

    1952 Fleetwin Impeller

    I think I need to replace my impeller as I did not see a pee stream and just got the motor last week. I am seeing that part # 18-3001 should be used as the replacement but I am reading some say I need to use a sander to grind it down a bit but some do not say anything to that effect. Can...
  15. Fester

    1952 Evinrude Fleetwin Clutch

    I have just aquired a 1952 7.5 hp Evinrude Fleetwin. It is in excellent condition but I need to know about the clutch. Do I pull it up or push it down when starting it? I want to make sure that I am not going to do any damage the 1st time I try to start it up. Any information or tips you...
  16. Fester

    1969 Evinrude Lightwin Low Speed Knob

    I have a 1969 Lightwin and am looking to make sure that I havbe covered all bases to get the most out of it. I have changed the fuel mixture from 40:1 to 50:1 and tweaked the rich/lean knob (high speed) and have definately got more out of it than at first. But, I turn the low speed know and it...
  17. Fester

    Evinrude LightWin Smoking

    I have a 1969 Evinrude Sportwin 4 HP motor and I just cranked it up and found that it smokes a bit more than usual and it is leaving oily deposits in the water barrel. I was running a 40:1 mixture but was advised top switch to 50:1. Well, that's what I did and I am not sure that it may be the...
  18. Fester

    Help Replacing Pull Cord on 4HP Lightwin

    I just tried to test my motor to make sure it runs for my next trip and it seems that the pull cord is completed rotted and falling apart. Can anyone advise me how hard it is replcing this myself? And how long it should take. Thanks in advance! Also, does anyone know if I can us a lawn mower...
  19. Fester

    Getting more out of Evinrude Lightwin 4HP

    I have a 1969 Evinrude Lightwin 4hp motor and just took it out yesterday will success. I found that if I ran it with the high speed knob turned to full lean that it ran better than ever but it seems like the motor has more to give. Is there a way to tweak the motor to get it to run faster? It...
  20. Fester

    Evinrude Sportwin 3.3HP Impeller Replacement

    Can anyone tell me where I can get an impeller for a Evinrude Sportwin 3.3HP model 4423 ? And also info on possibly a water pump?
Top