Search results

  1. wvmedic

    1995 Spartan Supreme roller trailer

    @JimS123 , I'm going to look into new rollers and definitely lower that keel roller a bit to tighten up the hull to the front rollers a bit. That thing made so much racket clanging around towing it..... Jeff
  2. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, gotcha and thank you.
  3. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, I agree the picture is deceiving. I might slide the winch post forward an inch or two. I'm going to lower the bow keel roller about an inch as well. I think that might fix the issue of the hull not sitting on the front rollers solid enough. Jeff
  4. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, the rear rollers are only about two inches in board from the transom edge. Where should the transom be sitting on the rear rollers? Jeff
  5. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, understood and thank you for that. Jeff
  6. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, I see the crack now. No idea how I missed that. I'll absolutely look at moving the boat forward. I want a different tie down system for the stern than is on there now. It's secure, but I want the ratchet system I've seen that stays attached to the trailer. I also want to use a transom...
  7. wvmedic

    1995 Spartan Supreme roller trailer

    I know this is picture heavy, I am sorry about that. The rollers are in great shape. The rear of the boat is solid on the 8 aft rollers. The front 8 are just touching the hull and I can wiggle them by hand. The only option I see is lowering the keel roller at the bow to lower the the hull...
  8. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, understood. Though with a slightly larger diameter roller, my thinking at least. Would give a smidgen more hight to the rollers making better contact with the hull. I will check the rollers over, checking the washers and such. I like the thought of the rollers for shallow launch...
  9. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, thank you for your response. They seem to be in good shape. The guy that previously had this boat and trailer took meticulous care of it. So I am thinking that they have been replaced. However, I'm not sure they were replaced with the correct diameter rollers. Jeff
  10. wvmedic

    1995 Spartan Supreme roller trailer

    I just bought a 1995 Crestliner sportfish 1750. It is setting on a 1995 Spartan Supreme roller trailer. The rollers are really loose, they move around a bit. I'm not sure that these are wobble rollers, but they sure do wobble. With the boat on the trailer, the rollers do move around and you can...
  11. wvmedic

    1980 SS 181 rebuild.

    Thank you MNhunter1, I appreciate the response. I'm still debating epoxy vs the Old Timers Formula. The one issue I'm trying to figure out is. Will I be able to glue the Nautolex down, and with what glue? My 2019 Alumacraft came with Nautolex and I really like it. I plan to wrap each section...
  12. wvmedic

    1980 SS 181 rebuild.

    Hello all. I just bought a SS 181 back that I bought in 2009. It has went through a few hands, deck has been replaced and needs it again. I am not sure what ply was used or if there is any flotation in it. The previous owners have really jack legged a lot of things, using drywall screws...
  13. wvmedic

    1980 120hp

    Gotcha Scott and thank you. Jeff
  14. wvmedic

    1980 120hp

    Sounds good, I think I could drill 2 more holes. I do appreciate the information. Jeff
  15. wvmedic

    1980 120hp

    So the Alpha one gen 2 will fit the MC-I transom profile? Jeff
  16. wvmedic

    1980 120hp

    Prop to pully? Disregard, I get it. Dense moment on my behalf. Get a complete Alpha one gen 2 unit. Jeff
  17. wvmedic

    1980 120hp

    Scott Danforth, look over my ignorance please. But I don't understand what you mean. Jeff
  18. wvmedic

    1980 120hp

    matt167, thank you. My current setup is 1980. Jeff
  19. wvmedic

    1980 120hp

    Bondo, If I go that route. I will absolutely do the whole package. Thank you for the information, I appreciate it. Jeff
  20. wvmedic

    1980 120hp

    So if I buy another boat for the complete running gear. What years will be a direct fit for the 3.0l and outdrive to fit the transom where my MC-I came out? thank you for your help, Jeff
Top