Search results

  1. A

    Poly Resin question

    I have been wondering something about the different type / brands of poly resins. When I started my project I knew nothing about working with resins. Now that I am 75% complete I know just a little more than nothing but im getting there. :) My understanding was that for a poly resin to dry...
  2. A

    Piston / bore clearance

    Im in the process of specing out the motor im building. The engine specs I have show production piston clearance should be .0030 - .0042 So my question is how to determine my clearance. I have measured the pistons and bore. Once I calculate a total clearance do I then take that measurement...
  3. A

    transom flatness fix ?

    So since this could pertain to anyone rebuilding a boat I thought it best to post a new thread. How would one go about fixing the outside of the transom if it were outside of spec on an I/O. I havent fully measured mine yet so im unsure if ill need to go down that road. I however was thinking...
  4. A

    decoding casting ID and date stamp on bbc

    Hello everyone. Im having trouble decoding the date and casting numbers on my gen5 block here are the numbers I have pulled casting 10114182 should be 91-95 gen 5-454 A275 - Unsure. Stamp on machined surface of passenger side front block TH01XXT5 - This is the prefix and suffix that is...
  5. A

    gasket recommendations

    Anyone have a preference as to the gasket brand when rebuilding. Seems they sell a marine version which is substantionally more expensive than a typical gasket kit. Anyone know if there is a difference or did they just add on the boat tax.
  6. A

    Engine cylinder out of round question

    So im trying to decide what I should do to my 1994 genV 454. I have everything pulled apart and have been taking some measurements. All crank journals measure within spec and should be good to go with a light polish. Cam seems good to go as well. My question is what to do with the block...
  7. A

    454 head question

    So it appears that my heads are in need of a rework. They are Gen 5 casting 10114156. I found a guy local who has what he claims are to be low mileage takeoff heads of the same casting number from warranty return vehicles. Supposedly the heads only need to be cleaned and can be used. If...
  8. A

    valve end play / reamer 454 1994

    So I checked the valves on my 454 and am showing somewhere between .003 - .004 play. It appears this is out of spec for this model so I will need to do some headwork. Anyone know where to get a reamer .015 oversized so I can ream and install new oversize valves? Anyone ever tackled this before...
  9. A

    Unable to create a post in a thread I started

    For whatever reason when I try to upload pics to the restoration thread I started it states that I am not authorized to make this post. Is this just a glitch from the turn to new software? Thanks
  10. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread Finally a pic of the majority of the rear.
  11. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread pics of consoles. Anyone have a good way to support the consoles while im hacking out the rest of the floor. I currently have them supported with 2x4's as you can see by the pics.
  12. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread More pics of the tabbing and stringers coming out. Sorry the pics of the entire structure didnt come out for whatever reason.
  13. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread
  14. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread More pics in sunlight
  15. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread Okay, well you wanted pics.. I have pics.. You can see from the pics there are numerous fibers that have never been saturated with glass. I couldnt get a pic of me actually prying up the sheets so most pics are after it was removed and what fibers...
  16. A

    Improvements or enhancements to your boat

    So im interested in thoughts as to what ideas people have for improving their boat. Maybe you have an idea that you've contemplated but never gone through with. Maybe you added or built something that has worked well. Figured it may be beneficial to have a thread which everyone could mention...
  17. A

    1994 Chaparral 230 rebuild thread

    Re: 1994 Chaparral 230 rebuild thread Here is one pic.. Sorry it was after a lot of demolition. You can see some of the foam left on the right near the transom. That same configuration was on the left and right and follows along the sides up to the driver and passengers consoles. The tank...
  18. A

    Foam removal

    Any good suggestions for foam removal. Ripping up the floor to get at a stringer and the foam is killing me. I knew this stuff would take time but darn its the little stupid things that seem to get me behind. If its not the carpet glue holding me back its the foam AUGHHHH
  19. A

    To Mercathode or not to Mercathode

    Im getting ready to pull my motor and cant decide what I want to do with the mercathode. This is a fresh water boat that is not left in the water except for maybe 3-4 days a year. Is the mercathode even worth having. At this point it seems like more trouble than its worth to rewire and...
  20. A

    who has used advantech for boat floor etc

    Considering the use of Advantech for the floor on my boat and am curious if anyone else has used it before. I was told by someone on this site in another thread that I should probably use Epoxy if I did go with it due to its construction. Just curious if anyone had used it before and if they...
Top