Search results

  1. redfury

    Force 125hp fouling rich?

    So, I'm reaching out again in search of clues/direction/answers. I've got a 1987 Force 125hp on my 17ft Glastron. The engine sat on my deck on a stand for 3 years before I was able to get it installed on the boat during reconstruction. I put the motor on the boat and it fired up and ran...
  2. redfury

    Force 125, thought I had a bad reed valve

    So, end of the season, brought the family on the boat, had a gunshot like backfire that destroyed the rubber exhaust boot. Couldn't get the engine to run without the hood off, and it didn't run that great. Used the trolling motor. Brought it back out and it ran, but a bit rough, I could hit...
  3. redfury

    Calling MN boat restorers out there...

    Sorry red. Can't do this, even though it is a kind gesture.
  4. redfury

    Installing a Force 125 onto a different boat

    So, I hung the motor on the back of the Glastron ( V178 ) and start to think to myself..self, you should have bought a Jack plate instead of using the mounting system they designed for the motor.....:grumpy: What is the deal with this motor mount? Holding 125 Forces in place with 2 bolts and 2...
  5. redfury

    Plasti dip your boat?

    So, in my never ending endeavor to find different painting solutions for my Glastron project, considering some of the paint schemes I've wanted will ultimately end up costing my hundreds in paint alone, I've kept my eyes out for other possible solutions. I ran across this tonight and have...
  6. redfury

    Funny "TLC needed" boat ads on Craigslist.

    Re: Funny "TLC needed" boat ads on Craigslist. I love how it's a picture of a picture. For that kind of money, take a picture of the boat with the camera you took the picture with...we know it's possible!
  7. redfury

    Official Business of the 3V Club ( aka tri hull club )

    Okay guys and gals, now that we have our stickers and enough active members to get a thread moving along...here's our not-totally-official-until-stickied-club members thread. If you are not a member of the club but want to be, resurrect this thread here and get your induction into the club...
  8. redfury

    boat pulling to the left

    So, I'm out fishing with my 14 ft tinny with a 25hp motor a couple of summers ago-out on the lake with another friend in his own boat. We were working the shallows throwing plugs and bobbers out. Not much was happening, so I was moving around a lot, trying to find a decent piece of structure...
  9. redfury

    reasonable expectations

    I'm buying my neighbors 86'ish Force 125 for 500 bucks ( He upgraded boats and is parting his Bilgeliner bass boat out ) and I happened across old literature from Mercury. It showed my exact boat, with a 65, 85 and 115hp Merc ( tower of power ) with performance specs. Loaded with 4 people...
  10. redfury

    The Paint Thread

    I think it's high time that we compile our experiences with the different paints out there and discuss what we like and don't like about them. What I'd like to see is some specifics beyond " I just like it", if you know what I mean ;) For those that roll and tip, what size roller, what kind of...
  11. redfury

    below deck coatings

    Well, I'm getting to the point where the deck is going in my boat ( I finally got all the wood cut and am going to seal it on Monday! ) My dilemma is, what to do with all the glass work I did. I never used any wax in my laminating resin when it was all said and done, most of the glasswork is a...
  12. redfury

    lower unit draining oddity

    Well, I've got horrible pictures, so I won't post them until I get a chance to get a better set taken, but I'll try to describe to the best of my ability and see where we get with my question... My neighbor has a 125hp Force ( painted black,year unknown ). To drain the lower unit, he has to...
  13. redfury

    noticed something the other day..

    We've been having storms running through the area lately and when I was driving my truck home, I noticed that it accelerated much more strongly than it normally does. The humidity was up from the last time I drove it, but I called my friend who was driving the same way home at the same time and...
  14. redfury

    water pump replacment went awry?

    Okay, replaced my water pump with a sierra kit from Iboat a couple of weeks ago...had the lower unit off for the winter in the house. Had a heck of a time getting the copper tube that connects to the engine connected, but I got it done after a second try. Here's my problem though...when I...
  15. redfury

    need a number from someone

    the torque on the water pump housing bolts that is. I just put my new water pump kit on my 25 johnson ( 1990 ) and I can't seem to locate my manual today. The bolts are slightly tighter than finger tight right now, so it's together and isn't going anywhere, but I would like to get them...
  16. redfury

    perhaps the ultimate fiberglass grinder?

    http://www.makita.com/en-us/Modules/Tools/ToolDetails.aspx?ID=316371 Wish I had known about this thing. I've been looking for dust extraction for a grinder for a while and all I can find is 30-$99 dollar add on's online...nothing locally. Fastenal carries these I believe, and I do have a...
  17. redfury

    Ooo! Sparkly! Redfury's Grinding again!

    After so many moons of sitting in half a project making "vroom, vroom" sounds whilst the rest of the board here is kicking tail on their boats, I've finally donned my tyvek suit of armor, goggles, and armed myself with excalibur...er, my trusty Makita grinder. Isn't that the expression of...
  18. redfury

    greatest Craigslist add ever!

    http://minneapolis.craigslist.org/cto/1114767865.html Ad says "needs carb work, moter turns over and fires" :rolleyes:
  19. redfury

    facebook

    Since Facebook opened its doors to non school alumni ( ie, the rest of us folks ), I was wondering how many here were using it? I was on Myspace only because of peer pressure ( wife ) and it's a good way to leave messages for my brother ( no phone at the time ) and just get stuff off my chest...
  20. redfury

    What's Iboats trying to say?

    Got this in my email in Iboats "this month in review". Kind of a shot at us guys fixing our boats a little, isn't it?
Top