Search results

  1. Lou C

    Broken Spark plug

    All good suggestions, to which I'll add keep your parts organized when you dis-assemble, and clean, clean, clean. Take pix of things that believe it or not are not 2nd nature once they have been apart for a while. When re-installing the head, clean out the cyl head bolts in the block and make...
  2. Lou C

    I/O (Sterndrive) Conversion to Outboards

    I can see this as the beginning of a new consulting business for you Ted.... "Sick of your sterndrive, re-power to outboards with Ted" and if your upolstery is looking shabby, we can fix that too!
  3. Lou C

    Cobra outdrive issue

    https://www.crowleymarine.com/d/tech_article/omc-cobra-winterization-procedure the official OMC version.
  4. Lou C

    Cobra outdrive issue

    Well I have owned this boat and winterized it here in NY where it does get down to about zero for 22 years. And not only have I never removed that screw, but there is no mention of doing that in the owners' or shop manual. What you do is this: Go up to the engine and disconnect the raw water...
  5. Lou C

    Cobra outdrive issue

    Yep the only way that I know of to put that back together is to pull the drive and fish the retainer out of the water passage, then put it back together with gasket sealer, it is a water passage so you don't want that fitting to leak.
  6. Lou C

    How do you all like your remote oil filter setups?

    OK went and checked, same part # on the bag, although the number stamped is a '9' or a '6' so I guess that doesn't mean anything. Since I have to get in that area anyway to pull the drain plug, I can just keep using the block mount for now, I am going to switch from the short Merc filter to the...
  7. Lou C

    How do you all like your remote oil filter setups?

    Thanks for posting that, it answers the question, that you do have to change the valve, even though the guys at Michigan Motorz who sell engines with that kit, and also sell the kit, say you don't. I think I bought the same Merc valve, I have to check it to see. I wonder if the "28" on the valve...
  8. Lou C

    4.3 spark arrestor replacements

    Both are solvents just dry it out well.
  9. Lou C

    Starter motor

    Just make sure that the bolts you use are the correct length (not too long) or else the starter can shift and break the bolts…and that’s a big mess to fix!
  10. Lou C

    4.3 spark arrestor replacements

    A bit’o brake clean & compressed air…
  11. Lou C

    Volvo Penta 3.0 4 cylinder engine won't start

    I would: Get a VP wiring diagram verify that you have voltage you should have… Don’t buy parts from Amazon many counterfeit parts and just plain junk…. Find a local dealer who can get OEM parts, or good aftermarket ignition like CDI electronics.
  12. Lou C

    4.3L horsepower

    2bb carb was 175 hp, 4bbl carb was 205, my '88 FW H-200 (20'9") was specified from FW to use a 15x17 prop, for more hole shot you could drop the pitch down to 15, although that limits top speed. The goal is to get your wide open throttle maximum RPM where it should be according to the...
  13. Lou C

    Winterizing 89 Mercruiser 4.3 Alpha 1 Gen 1

    Do a search, yes it has been discussed, and they also sell testers to make sure it holds pressure, but do NOT over do it.!
  14. Lou C

    Winterizing 89 Mercruiser 4.3 Alpha 1 Gen 1

    I would pressure test and reseal the drive now, so you don't have water in the gear oil over the winter and you're ready to go in the spring. And it also prevents wasting gear oil if you find a problem over next summer. Impeller, I usually do every 3 years. But if you only do 10 hrs a season...
  15. Lou C

    I have a leak.

    They actually improved that by making the bellows just a bit bigger, so I don't have an issue getting it on and have been doing all my outdrive maintenance for a long time now. Not sure but maybe the aftermarket bellows aren't made the same as OEM. Honestly, I have had very little trouble with...
  16. Lou C

    I have a leak.

    Looks like you got the culprits! I have learned a lot about Merc drives reading these threads not having ever owned one. Only the OMC Cobra, which in terms of transom design is very similar to a Volvo SX (Volvo simply adapted OMC's transom design).
  17. Lou C

    Help with bow roller setup

    I agree I don't think you can get it any better than it is given the bracket you have but as it is, it looks fine to me...
  18. Lou C

    Another Winterization Thread!

    https://www.volvopenta.com/shop/0/part-sections/54158468 Here's what it looks like, the hose that goes up to the impeller housing should be attached to the left side of part #14, the hose that goes to the transom mount will be attached to the other side. It doesn't look as if this has a drain...
  19. Lou C

    Another Winterization Thread!

    These coolers are mounted on the rear of the engine right above the bell housing so they can be tough to see & get at. Follow the raw water intake hose all the way back from the impeller housing & you’ll find it. Often they are mounted at an angle to make them self draining if you disconnect the...
  20. Lou C

    Tie down caliper mounting bracket

    BTW trailerpartdeopt And trailerpartsdepot Are 2 different sites I’ve used www.trailerpartsdepot.com
Top