Search results

  1. b.gagnon

    carb mixture screws dont do anything!

    1979 Chrysler 70hp... I rebuilt the carbs and changed the fuel pump.....Now when I try to adjust the carb it has no effect on the motor! The best part of all is that the motor is running Great! In the water It is idling @650rpm in gear and smooth as can be. Top end is great too. The only problem...
  2. b.gagnon

    How should I mount my bunks?

    I have a 17' seanymph aluminum boat that I just got a used trailer for. I plan to put new bunks and rollers on but I question what position of bunk to use. The old trailer (which I don't think was ever set up right) has vertically mounted bunks. What would be the reason for mounting them this...
  3. b.gagnon

    Tohatsu tach Not working!

    The motor is a 2007 Tohatsu 30hp. This is a friends boat and I am trying to help him out. The oil light self checks, and the backlight works but the tach does not move. I checked all the connections and they are all clean and tight. Two things that I noticed when looking at the boat were that he...
  4. b.gagnon

    This trailer has no suspenision!

    A friend of mine just bought a 05 18? angler cc?.It came with a nice looking aluminum trailer, but it has no suspension! Can this possibly be good for the hull? He will regularly be towing about 150 miles round trip for the bulk of his use once or twice per week.
  5. b.gagnon

    Trim tilt?

    I have a 1979 Chrysler 70hp outboard with the trim unit off of a 1990 Force 90hp. When I try to trim the motor up or down the relays just click! I changed the relays but that did not help. I have jumped the trim motor directly and it works fine, and when I used a test light to check the output...
  6. b.gagnon

    Controls swap?

    I was wondering if the controls from a 1985 90hp Johnson would work for a 1979 Chrysler 70hp? All I need is for the shift and throttle cables to work because I have a dash mounted Ignition on the Chrysler. I hate the Chrysler controls and would love to mount the OMC unit. I also plan to mount...
  7. b.gagnon

    15hp powerhead swap?

    Will a 1992 Evinrude 15hp block fit a Evinrude 15hp 1977 motor?
  8. b.gagnon

    Trim stuck!!!

    I have a 1985 Johnson 90hp outboard....I rebuilt the trim unit over the winter, then re-installed it and it worked great! Now after sitting a few months it is stuck mid way up and wont go down....The relay is fine and the trim motor turns but it just wont go down! I even tried the manual relief...
  9. b.gagnon

    time to paint my outboard...

    What is the best way to remove paint from an outboard? I have a 1985 Johnson 90hp that has blistering paint all over. I was hoping that I can brush on some striper, but I don't want to use anything that will harm the aluminum.
  10. b.gagnon

    86 13' whaler SS

    Does anyone know the required shaft length on this boat? I need to find out ASAP but the boat if a few hrs away! I think it's 20" Thanks....
  11. b.gagnon

    Tohatsu/Merc

    I know that tohatsu makes many small motors for merc, but at what hp does merc take over? A friend of mine is looking in the 30hp range for a 13' whaler super sport and there seems to be quite a difference in price between the two brands. Also any opinions on Tohatsu outboards are welcome...
  12. b.gagnon

    Trim tilt rebuild

    1985 90hp johnson...Does anyone make a total seal kit for a rebuild?
  13. b.gagnon

    Mich PJ81

    I have a mich PJ 81 prop and was wondering what pitch and dia it is???Anyone know?
  14. b.gagnon

    I want to repaint my outboard!

    I want to repaint my outboard! I want to repaint my outboard! it is a 1985 Johnson 90hp White...Does anyone know what and where to buy the exact same color? Also a friend of mine has a case of Cold Zinc primer, would that be ok to use? I have used Zinc Chromate primer but never heard of Cold Zinc!
  15. b.gagnon

    Trim tilt harness?

    I have just recently bought a 1985 Johnson 90hp, and am trying to connect all the wires. There is a 4 wire plug that comes out of the trim relay box that has nothing to plug into. I should add that the trim does not work. Am I missing a wire harness of some sort? I can't find anything in the...
  16. b.gagnon

    vro tank wires..

    There are two wires that come off the vro tank. Where do they go????1985 johnson 90hp.
  17. b.gagnon

    Trim/Tilt Fluid?

    What type of trim/tilt fluid goes in a 1985 90hp Johnson? What came out was red....
  18. b.gagnon

    Looper or x-flow???

    I just bought a 1985 Johnson 90hp... and was wondering if it was a x-flow or a looper?
  19. b.gagnon

    What year???

    Merc 35hp 0A951584 Model Number: 1035716
  20. b.gagnon

    13' Whaler..trailer setup

    A friend of mine just bought a 1986 13' Boston Whaler super sport, and the trailer that came with it was not set up right! As it I was wondering if anyone had any pictures of a similar setup so I can get an idea of where to stat...
Top