Search results

  1. W

    8 inch wheels on highway

    i have a small trailer with 8 inch wheels on it i am lookin to take it on a highway where speeds are 70+ mph. i have to go about 200 miles round trip. the trailer will be loaded with a 750 motorcycle 1 way (home) about 400 lbs give or take is this a good idea ?
  2. W

    primer bulb question

    when pumping my primer bulbs it does not get hard i can feel there is fuel in there but when i pump it i can hear the gas going back into the tank is this some kinda bypass so i dont blow the float needle ? the bulb gets firm just never hard
  3. W

    ?s on charging a trolling motor battery

    my questions is can i charge the battery though my trolling motor plug ? i just ran my trolling motor wires and battery and fish finder wires and it seems easy to just unplug the trolling motor and get another plug for my battery charger and plug it in there to charge my battery. i have 1 group...
  4. W

    transom mount to bow mount ??

    i have a motor guide transom mount trolling motor i am lookin to make it a bow mount but i cant find the hardware cheap to do it does any 1 know where i can get the bracket i missed this by seconds but it looks to be exacly what i needed <br /><br />...
  5. W

    eagle fisheasy fish finder

    i got a deal on a portable fish finder but i am lookin to hook it up direct. what i need to know is where can i find a mount for it and a longer power cable.will it be ok to hook it to my trolling motor battery ? it runs on 8 d batterys. i read the manual and it says it will run on 10-15 volts...
  6. W

    point to electronic converstion aftermarket

    has any 1 converted points over to electronic. i seen an after market converstion that said u dont have to mess with points or condencers anymore. it is about the size of a quarter and looks very simple to hook up i was just wondering if it was worth trying ??
  7. W

    forum for used parts ??

    if there any boards for used parts i am lookin for some parts or a parts engine for a 9.5 evinrude i use to have a sight but lost it when i had to redo my computer thanks for any help <br />email wheinlei@tampabay.rr.com
  8. W

    question on in line fuel filters

    i have a 9.5 that i put a small car fuel filter in line. i have hear that its not good to be because it traps the oil from the fuel is this true ?
  9. W

    johnson 14hp lower unit stuck HELP joe

    i have a 1985 14 hp and i cant get the lower unit off i took out all the bolts and still no luck. there are 4 bolts holding it to the midsection and a stud with a nut on it going from the lower unit to the midsection thats where is seems to be stuck. i removed the 4 bolts and nut and can get the...
  10. W

    johnson 14 hp questions -year ?

    i just got a johnson 14hp i need to know the year. here is the # off the tag <br />HJ14RSLF<br />0211705<br /><br />its a long shaft but looks like it has a center section that can be taking out its about 6 inches tall just above where the lower end splits. can i take that out and make it a...
  11. W

    gps needed

    Sorry. Solicitation is not allowed here.<br /><br />iboats sells GPS units. Check out the Mega Mall<br /><br />JB
  12. W

    bow mount bracket needed

    i need a bow mount bracket does any 1 have 1 laying around please let me know i have a motorguide trolling motor and i dont like it mounted at the back of my boat.brand does not matter just let me know what you have. thanks again
  13. W

    whats it worth 12' aero-craft

    i have a 12 foot aluminum aero-craft with a 9.5 evinrude 1971. tilt trailer all in great shape it also has a new trolling motor and group 27 battery. i live in fl and wanna get about 1500.00 out of her is that too much?
  14. W

    new trailer winch stand needed

    where is the best place to get a new trailer winch stand ?
  15. W

    what wood to use for a casting deck

    i am looking to make a 4ft X 3ft casting deck on the front of my 12 foot aluminum v-hull.i am going to go from the first front bench seat to the second bench seat with the deck what kinda wood can i use i was thinkging 1/2 inch OSB.i dont want to spend alot on wood i am going to cover it with...
  16. W

    how to change trans mount to bow mount?

    i bought a trans mount trolling motor (motor guide) i would like to have it on my bow but i can see how to attach it to make it work. can i get a bracket or somthing to make it work?
  17. W

    zinc question for outboards

    i was talkin to a guy about how an aluminum outboard with stainless bolts dont really go well togeather he said that new engines have a zinc bar bolted to them that stop the corrosion.my engine is old (1971)should it have that ?
  18. W

    custom decals

    i had a guy do a great job for me on some decals he will do whatever you want numbers,letter, fonts,in many colors he is very cheap and mails fast.<br />his email is <br />dave.brown@mchsi.com <br />let him know that wayne sent you and he will give you a good price.<br />i thought i would pass...
  19. W

    engine hight question

    i need to move my 1971 9.5 evinrude up on the ransom of my aluminum 12 foot vhull i can only move it up about and inch but this will put my cavitaion plate just about to the bottom of the boat(still alittle low)i am doing to use solid rubber to fill the gap between the top of the transom and the...
  20. W

    need cam follower for 9.5

    does any 1 have a parts engine laying around i need a cam follower.its the plastic lever thats between the carb throttle and the cam on the pionts plate.please let me know i can buy it or trade if you need parts for a 9.5 or i will buy the whole engine
Top