Search results

  1. R

    Plastic Cam puley remove in Tohatsu 8, 9.8 15 20 hp

    Hi. is there any tool to remove cam puley from valve shaft. This cam puley is made in black plastic. i dont want to brake it or brak cast iron valve shaft. any tips?
  2. R

    Evinrude 35 HP Elan, 3 cyl. 2 stroke

    hi. i need some help with Evinrude 35 HP Elan, 3 cyl. 2 stroke. motor starts very hard. runs poorly. i had cdi failure( no spark at 3 cyl). its realy expensive part. difficult to fix here in my area. now i instaled new(used one). i got sparks on al cylinders. i run few hours , but poor runing...
  3. R

    suzuki df140 2012 crankshaft bearings

    yes you are right. block is coded BBBBB and crankshaft is coded 22222. on edge of old bearings there is no color code= no one color/ so with cross table I got bering with no color
  4. R

    suzuki df140 2012 crankshaft bearings

    I run into rebuilt motor, suzuki df 140 2012. on crankshaft bearings is some scoring, crank is perfect only needs to polish. i dont know which bearings to order. i need standard bearings but on parts listing is few to choos. can anyone helpm to point which one to order. here is a photo atached.
  5. R

    Evinrude 15 hp 4 stroke, 19997 timing belt

    Hi. any one can help me to find timing belt for Evinrude 15 hp 4 stroke, 19997. its NLA at Evinrude parts catalog
  6. R

    Mercury 60 hp 1997 runs when tilted but dies when in the water

    Friend of my get strange symptoms on Mercury 60 hp 1997. motor runs when tilted on the boatbut dies when in the water just die. water panel gaskets looks fine. no lickage.what can cuse this problem
  7. R

    Tohatsu 9.8 4 stroke 2006y making oil

    I got Tohatsu 9.8 4 stroke 2006y. It's new to me outboard. i run motor for few hours at troling speed and i notice oil level is going up. its smeling fuel. whats the problem can be . fuel pump or the carb problem?
  8. R

    yamaha 40 hp 3 cylinder Autolube

    Hi. I'm working on yamaha 40 hp 3 cyl autolube, 3 carbs. motor runs good on idle but when i thy to accelerate is not picking rpm, just bumping. i can see good stream of fulel geting from 3 carbs to3 cylinders. this model has timing advencer on cdi module. advencer works (moving up and dowm) but...
  9. R

    Mercury 1997 75HP no spark 3 cylinders

    I'm working om Merc 75hp 3 cylinders with no spark. Where can I find Ohm readings spec for stator and triger. triger has 4 wires going to inside : brown -white, purple-white/black what resistance should be?
  10. R

    Mercury 60 hp 2016 smartcraft remote control ignition switch

    Ni. i need some help. Friend of my bought in US crestliner boat with Mercury 60 hp, 2016y. Bouat was transited to Poland by cargo ship. On boat terminal someone stole ?Upper cover and ignition keys. I bought used cover on ebay but now i,m going to change igniton switch with keys. but which one...
  11. R

    Mercury 200 20 hp stator

    I run int bad mercury 20 stator( part no 339-3996A7) with no spark. is there any way to repair this?
  12. R

    Tohatsu 9.8 carb question

    Maybe someone can help me. I nned to know one thing. Just over chocke plate inside the carb is a venturi hole. what the noumbers are stamped inside? or can any one measure venturi diameter taken ftom chocke plate side?
  13. R

    Johnson/Evinrude 9.9/15 ratling

    Does any one did any try to stop" ratlimg" engine noise. Those motors have special sound. I would call it "ratling".I.m thinking to make some kind exhoust tube insulation to reduce this sound. Yamaha 9.9 , 15, 20-30 hp is much more quiet.
  14. R

    yamaha 50 hp 2004y instaling controls

    hi. first time I'm instaling bigger outboard. its yamaha 50 hp, 2004y. i instaled 703 remote control but under the hood there are 2 conectors. what for they are? what cables di I need to conect to the tach display?
  15. R

    Evinrude 10 XP uppgrade to 15HP

    I got Evinrude 10 XP with restrictor plate removed. rebuilt the carb( new plastic top cover) compression is 8 bar in lower cylinder and 8.5 in upper.spark plugs are ok, spark ok. motor with UFI ignition( cdi under flywheel) i tested motor on the boat and i cant plain the boat. i could do it...
  16. R

    Tohatsu 9.8 4 stroke smoking a lot on the idle

    My friend got 2007 tohatsu 9.8 hp . manual chocke . motor got carb cleaning with high wibration metod. Now motor starts with no problem.accelerate fine. but after while on the idle in the backet motor start smoking from the upper relife hole. smoking apers when motor is on the boat transom...
  17. R

    Evinrude 8 hp connecting rod bearing

    Hi. Any idea where to fnd Evinrude 8 hp 2stroke connecting rod bearing. Motor made in 1992, bearing no 0431939.
  18. R

    Evinrude 10 or 18 hp identyfication

    Hi. I got nice looking and little used Evinrude . Id tag is missing. On soft plug is no: 10022, e3092. Cylinder dia is 60 mm Im not sure what year is from this motor and what fuel mix should be. Instaled new coils nad water pump impeler, carb rebuilt. Motor runs great.on the hood was sticker...
  19. R

    Piston for Yamaha 20a model 648

    old piston. dia is 64 mm
  20. R

    Piston for Yamaha 20a model 648

    Hi. i'm looking for oversize pistons for old 20 hp yamaha. piston dia is 64 mm. i need oversize piston,is it posible to get one?
Top