The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
Hi all - it’s been a while since I posted, but have always gotten good advice so thought I’d try again. I have a Volvo penta SX-M I/o which has a leaking trim cylinder. I’ve tried to ge the piston(s) off but the bottom shaft seems to be seized. I’ve removed the clips and washers from both...
Hi All,
I've got a 2001 Glastron 175SX with a Volvo Penta 3.0 in it. Whenever the boat is running the volts are only around 12.2-12.4, and if i Turin on the n'avait ligots or radio they drop to 11.7 or so. The sticker on the si de of the alternator says "12V Output", so my question is, is the...
Hi all,
I was trying to replace the plug on my trailer as I suspected that was the source of the intermittent lighting issue I was having. My vehicle is a standard 4 wire set-up and the trailer has a 4-wire plug with 5 wires coming in to it (see photo). Essentially there is a white (ground)...
Hi all,
I had the carb rebuilt on my Volvo penta 3.0l two years ago to cure a few fuel related issues. The engine has always run rich since having it done, and this year I've noticed a lot of smoke at idle, black soot on the transom and unburned gas bubbling up from the exhaust when it's shut...
Hi all,
I have a question about adapting driving style for pulling a Skier/Wakeboarder if I get a new boat. Similar to the situation that Dark Shadows is in, I currently have a 2001 Glastron SX 175 with a 130HP I/O. We have been bitten by the skiing/Wakeboarding bug, but are certainly not...
Hi all - I've had a couple of issues lately that have me wondering if the vent line to my fuel tank is working properly. First, when I park the boat in the garage overnight, there is a significant gas smell by morning. Second, I was filling the boat this weekend from a jerry can and without...
After having issues with the carb for a couple of seasons (issues with the high speed jets etc.) I finally had the carb rebuilt last year. Now the boat runs great, but I get a lot of black residue on the transom which suggests to me it might be running a bit rich. The manual says not to adjust...
Re: Trouble Pulling a Skier Need Help
I think this sounds about right - take up the slack under idle. I even like to go at idle for a few seconds once the skier is moving to align them with the boat. Then gradually, but quickly increase the throttle. If the person is in the right position...
Re: New Inflatable.
We've got an Airhead big slice 2 person tube as well. We often have two adults on it with no problem. However it gets trickier to hang on with 2 people as you've got less room to move around. Amazingly, no one has been elbowed in the face either. The only challenge we...
Hi all,
Ah - the joys of boat ownership continue. First, i have a 1999 Volvo Penta 3.0l GS-PEFS engine. Had some overheating issues last year but all of those are now resolved and she's been running pretty well so far this year.
I know that the carb needs a rebuild as i don't think the high...
Hi all,
I've read through a bunch of the other posts on this subject, watched a few tutorials online (which all make it look amazingly easy, btw) but am still in need of a few tips from the experts out there.
I've just learned to ski this summer and think i'm doing pretty well. I have no...
Hi all,
My brother and i were out skiing this weekend and both experienced the same thing with our shin's. First, we were skiing in slight chop (waves maybe 6-8inches). The waves aren't much, but certainly not glassy calm, especially with so much traffic on the lake.
Anyway, after skiing we...
Re: Problem with Volvo Penta 3.0l not returning to idle
Hi - was out of the country for a couple of weeks for work but am finally able to post pics. Tried to adjust things again but it always ends up with the same result. To answer your question - it does not return to normal idle even with...
Hi Gang,
I feel like an idiot posting this, but am trying to find a part for my transom ladder online but haven't come up with anything even close. The part is a simple nylon u-shaped thingy that holds the ladder up while under way.
I've goodled everything i can think of but with no luck at...
Hi,
I've got a 2000 Volvo penta 3.0l GS-PEFS engine. I'm not sure if this is a carb issue, an adjustment issue or a linkage issue. The engine runs well but once it is warmed up, it will not return to it's proper in-gear idle at 800 rpm. It tends to sit around 1000-1100 instead. If i lift...
Hi all,
We've been out skiing a few times this year, and have been having pretty good success for complete newbies. Last time out we were both able to get up first time, 3 tries in a row. I am getting more comfortable manouvering outside of the wake and then back in though my wife is still...
Hi all,
Was finally out skiing a couple of weeks back and had a ball! We're both complete beginners and have each only skied a handful of times. However, my wife commented that she felt the hand-me-down rope that we got from my brother was a bit short. After checking it out more thoroughly...
Re: Engine mount repair question
Ok - so there have been some interesting developments as far as this little problem goes. The first, is that i have been able to contact Glastron and they have told me that there is indeed no wood in the hull of my boat at all. They even attached an old...
Hi all,
I'm still working on a variety of small issues on my 2001 Glastron 175Sx. The current challenge is what to do about replacing/repairing one of the lag bolts that holds the starboard side engine mount in place.
One of the engine mount bolts is completely rusted out and just lifts...
Hi all,
As the boating season is quickly approaching, my wife and I are excited about learning to ski. But i have several questions about what is the best gear for us. Our hope is that we'll be able to do some basic slalom by the end of the summer.
Question 1: I'm about 5'10 and 180lb and my...