Search results

  1. M

    Force 120hp won't start

    Question..... How do you proper set idle for everything on this engine. I thought I Dit everything okay... But not so sure anymore
  2. M

    Force 120hp won't start

    Tnx for helping anyway. I really appreciate it. At around 18 sec. I applied the choke by hand. That helps.... And indeed when I do it for a longer period the fuel comes out
  3. M

    Force 120hp won't start

    i pushed here
  4. M

    Force 120hp won't start

    I dit lift it... Only i dit it on the top carb. The the bottum one goes allong with it becaus of the tie bar
  5. M

    Force 120hp won't start

    I made a video. Hope this Will help
  6. M

    Force 120hp won't start

    Okay.. The spark gap tester goes over 30kv. I think that is okay..... Timing is set at arround 28 30 WOT static..... Fuel pomp works. The clear fuel line is getting full with fuel..... Primerbulb is staying hard...... Choking lets it sputter en sometimes it starts. Also manual open the...
  7. M

    Force 120hp won't start

    Tnx for all the Good thinking every one. Iam back from vacation. The bottum carb was stock. it didnt get any fuel. Clean it again. Now it look okay. I checked every thing you mentioned. ONLY thing is checking how strong the spark is. Spark gap tester is comming today... I hope. At my surprise...
  8. M

    Force 120hp won't start

    Timing is set at 28/30 WOT. With a simple timing light. Compression is 120 at all 4 cilinders. Withe a spraycan i already Tried that. It starts to sputter a bit... I hope for a little more.
  9. M

    Force 120hp won't start

    Tnx for your answer.. The fuel pomp is rebuild. Fuel is getting to the carbs. The reeds are intact. They close Almost completly., when i put a flashlight on the reeds i See a tiny bit of Light. Or should it Be completly closed( like 100%). When iam back from vacation i will rebuild the carbs...
  10. M

    Force 120hp won't start

    Nr 20??
  11. M

    Force 120hp won't start

    I really dont know. On vacation now. Will look at it when i am back
  12. M

    Force 120hp won't start

    So yesterday i mounted clear fuel lines. From the fuel pomp to the carb the is no fuel running.. ONLY when i put my hand on the air inlet of the top carb fuel is floating. The spark gap tester cones in afew days. But tomorrow iam going on vacation so i Will have to wait for 2 week 's before...
  13. M

    Force 120hp won't start

    Almost New battery normal for a mercedes 800ah test past with a tester
  14. M

    Force 120hp won't start

    Pump it up with the primer bulb.when ibtake the Bowl of. It is filt with fuel
  15. M

    Force 120hp won't start

    Iam sorry what do you mean with the float on bottem carb?? I followd the manual from frank
  16. M

    Force 120hp won't start

    The flywheel and key are looking like New. And they are absolutly fixed on the crankshaft no movemend. at all.
  17. M

    Force 120hp won't start

    Where they suck up the air.. The another thing.. The top carb is sucking a lot more air than the bottem one.. It is Just a feeling that iam having. But the compression is the same in al 4 cilinders. Reedvalves are looking ok
  18. M

    Force 120hp won't start

    No Just visual. Spark on all 4 cilinders. Not with a tester i ordered one yesterday. How do they (tester) work??
  19. M

    Force 120hp won't start

    Yes they do. When i put my hand on the back of the top carb fuel is leaking out of it. But not at the bottem one
  20. M

    Force 120hp won't start

    Thanks i also followed this great explanation ftom frank.... But no luck Could it be something with the RECIRCULATION system?? Or has this nothing to do from staring the engine..
Top