Search results

  1. AverageJoe72

    1984 Sea King Chrysler

    Haven't tried that exact test, but both plugs are definitely getting spark and they look like they should, not overly rich or lean. if you listen to the video, you can tell it isn't missing either.
  2. AverageJoe72

    1984 Sea King Chrysler

    Ok, previous carb problems (most likely) worked out. New issues/questions: DISCLAIMER: I'm an electrician, not a motor guy. I replaced water pump and lower seal, thinking water and oil coming out of those holes together was bad. Took a look at electrical system, there was a pinched wired on...
  3. AverageJoe72

    1984 Sea King Chrysler

    Good to know that it is normal. Thanks! Yes, first time running it. It took quite a few pulls (and pumps on the hose) to get it running...truth told had I loosened the cap on the gas can, I could have avoided that rigamarole altogether...🙄 As far as the carb, jerry, there's only one screw to...
  4. AverageJoe72

    1984 Sea King Chrysler

    I ran it today with 50:1 and it started up and ran fine... I need to get the idle dialed in though. One thing that troubled me was the water in the garbage can had a lot of oil in it after I ran it for a while. When I took it out, I saw this... Not only was water spitting out of the exhaust...
  5. AverageJoe72

    Best way to repair corrosion on aluminum boat

    What about treated lumber that has been varnished? How long does it take before that aluminum would get eaten away? I'm asking for a friend... 😳
  6. AverageJoe72

    Has anyone seen or heard of a trailer tire doing this?

    I don't agree. Keeping the tires out of the mud when wintering your trailer does keep them from rotting. I've seen it with my own eyes. True, though, I also look at my old wive's tail from time to time as well.
  7. AverageJoe72

    1984 Sea King Chrysler

    Great. Thanks Jerry. I read last night that "all walbro carbs" start at 1 3/4 turns out, but then they referenced carbs with Hi & Lo screws (LMB 229). This one only has one. This gets me close, I hope to get it tuned from there. I'll work on it today after work and see if I can get it tuned...
  8. AverageJoe72

    1984 Sea King Chrysler

    Hello all, I'm new to join, but have enjoyed reading the forums through a couple of motor rebuilds. First off, thanks to all who offer their experience and expertise here. There are people who use it!!! We are grateful! I recently bought this motor and the previous owner told me that he could...
Top