Search results

  1. M

    Evinrude 9.9 carb question

    Yes a new #21 is installed. I need to take a look at the cover I used. Maybe there is no way for air to enter the top of the carb?
  2. M

    Evinrude 9.9 carb question

    Working on a 1988 evinrude 9.9. Plastic top carb. Original top was cracked. I installed one that looks just like the updated kit which uses a plastic nipple in which to slide the throttle roller onto. I transferred the needle valve from old to new (this version uses a front mounted mixture...
  3. M

    Honda 9.9 burning oil

    Is this similar to a car where I can pressurize the cylinder through the spark plug hole then change seals? No need to pull cylinder head right?
  4. M

    Honda 9.9 burning oil

    Thanks. Know of any good write up about how to do the valve seals? Why the thermostat test?
  5. M

    Honda 9.9 burning oil

    Why don't you think it's burning oil? What about the fresh oil I'm finding in the breather hose and airbox screen?
  6. M

    Honda 9.9 burning oil

    New to me 2008 9.9 Can't get it to accelerate without big bog that will kill the motor if not turning back throttle to idle. If you turn throttle slowly it will rev up but blowing smoke out exhaust. I cleaned carb thoroughly. Found engine oil in airbox on that screen looking part. Pulled spark...
  7. M

    Nissan 30 hp 2 stroke tiller kit

    Thanks. Just what I needed to hear
  8. M

    Nissan 30 hp 2 stroke tiller kit

    New to me late 80's? Nissan 30 hp 2 stroke. Want to make it a tiller style. Anyone know what's in the kit part number 372S630001 Got the part number from boats.net. it's a tohatsu kit but should be right for my Nissan.. thanks Serial number NS30 A3. 346-b1.
  9. M

    Identify this fuel guage

    I guess I'm mostly concerned about the guage working with current sending unit. Is that something I need to know before buying a new guage?
  10. M

    Identify this fuel guage

    Fuel guage in my 1997 wellcraft 190ccf Need to replace due to fogging when humid out. Trying to get the same one so I can keep the same sending unit. Thanks For some reason it won't let me upload the picture
  11. M

    Mariner 30 hp oil injection delete

    Is there a way to check if oil is being delivered?
  12. M

    Mariner 30 hp oil injection delete

    Yeah you are probably right. I guess I'll keep it
  13. M

    Mariner 30 hp oil injection delete

    Got a 1996 mariner 30 elo (2 cylinder single carb with oil injection). Looking to remove oil system and mix manually. Anyone know the procedure to do this? Can I leave the oil pump attached to the block? Just disconnect and plug oil pump lines? Will there be a warning system that needs to be...
  14. M

    9.9 hp yamaha 4 stroke crank pressure

    I'm afraid to put oil in it and try to start it. I don't want that pressure to go blowing oil out of the dipstick hole. Something doesn't sound right with that area being pressurized but how come it made good compression?
  15. M

    Yamaha 130 v4 idle mix screws

    So is it confirmed turning the screw counter clockwise makes it leaner? Turning them in (clockwise) makes it richer?
  16. M

    130 v4 engine oil tank leak

    2001 yamaha 130 hp v4 Anyone know if it's the reservoir or the sender that causes a leak. It's definitely coming from the sender to tank area. Mostly when the engine is tilted all the way up.i have the arrow on the sender top lined up with the arrow on the tank. I'll try a new sender but I know...
  17. M

    1988 Yamaha ELG 40 , trying to change water pump/impeller

    Did you pull the flat impeller plate? I just did a pump on a yamaha 8 hp 4 stroke and all the blades were off the impeller. I lifted the impeller plate and found all 6 fins.
  18. M

    Yamaha 704 binnacle remote question

    And here it is. Yes indeed you can get a 704 binnacle remote with locking neutral. Part number as given to me by boscoe99 is correct p/n 704-48205-TO Thanks for your help boscoe99 I appreciate it.
  19. M

    9.9 hp yamaha 4 stroke crank pressure

    That would be fine but should there be there pulses in the crankcase?
  20. M

    9.9 hp yamaha 4 stroke crank pressure

    Could it be doing this because the oil is empty? Previous owner may have drained it and never refilled it. He didn't use it without oil in it
Top