Search results

  1. acdc96

    Force 9.9hp steering problem

    My 1991 force 9.9hp has giving me a lot of steering issues... Recently the motor has been detaching itself from the steering bracket on the lower part (refer to the pic below). The shaft that turns it stiffens up and is very difficult to move until it finally turns free after 5 min of turning it...
  2. acdc96

    Alpha One Impeller?????????

    I have a 1986-1987 Mercruiser V8 with a Alpha One Drive... I need to buy a Impeller for it, IDK what one to buy? I don't know what generation it is either? Any help would be appreciated, thanks in advance
  3. acdc96

    Quicksilver throttle/shift handle stuck

    On my boat I'm reupholstering the side panels, the shift/throttle lever is fine and comes off easily. It's the 4 screws that hold the throttle assemble to the panel that won't budge. I've tried penetrating oil, impact driver, and some mild heat from a heat gun ( I had it on a low setting so it...
  4. acdc96

    Yamaha outboard paint

    Hi, I have a 1986 - 1987 yamaha 2HP outboard. I used it for hunting and painted the whole thing black. The lower unit is rustoleum high temp engine gloss black. And the engine cowling was painted with flat black BBQ paint. I removed most of the paint on the lower unit, & all of it on the...
  5. acdc96

    Outdrive painting

    My alpha one drive needs to be painted. When I last pulled it out of the water the whole thing had barnicles on it. I've scraped them all off with a plastic scraper. But the barnicle marks are their. What needs to be done for paint prep?
  6. acdc96

    Trim and Tilt issues

    My boat trim and tilt pump and cylinders are not working. The rams are free and not stuck but when I hit the bow up,bow down, or trailer the solenoids just click. It's a mercruiser alpha 1 with a oildyne/eaton pump. ( according to a clymer shop Manual) The pump has oil in it. If anyone can...
  7. acdc96

    Can I Polish and Wax a Aluminium boat?

    I have small 14FT aluminum boat that i keep in the salt marsh. It's developed a haze to it. Can I polish and wax it? I don't want to put a lot of money into doing this.
  8. acdc96

    Price of a Boat!!!!!

    I have a little 8 FT Rowboat. It is a fiberglass hull and has two swivel seats on nicely stained/clear coated wood. It has navigation lights, rod holders (homemade but look great), cup holders drilled in to seat supports (with a metal insert), and a fresh coat of paint. The hull is in excellent...
  9. acdc96

    1991 14 FT Sea Nymph 14K

    I have a 1991 Sea Nymph 14K and want to install rod holders, a Humminbird 561 DI fish finder, and a navigation lights panel (Bow light & Stern light already installed and wired). Any ideas on where to put them and mount them?
  10. acdc96

    Sitting for 5 Years what needs to be done?

    I have a Celebrity 210v with a 1986 MerCruiser 260HP V8 Alpha One engine, It's been sitting for 5 Years, but is currently running beautifully and has no problems at the moment, (knock Wood). what needs to be replaced or repaired? I'm a DIY guy and don't plan on taking it to a mechanic!
  11. acdc96

    1938 Neptune 1A38 Ignition

    I have a 1938 Neptune 1A38 1.2HP outboard. I cleaned and repaired all the parts on it. I'm having problems with the ignition system. I took pictures of everything else but the ignition. Their are 2 spots, one is on the point, and one is on the condenser. So, can anyone tell me what wires go...
View older results
Top