Search results

  1. S

    No pee Johnson outboard

    Let me also mention that the motor puts an awful lot of water out the two holes in the back of the motor I'm not sure if it should put a lot of water out those holes or not
  2. S

    No pee Johnson outboard

    How do I go about pulling the powerhead I'll see if I can find a video on YouTube but I'm not sure I'm capable of doing something like this is this a big job
  3. S

    No pee Johnson outboard

    At first I put it in a trash can at home and I thought perhaps the trash can wasn't deep enough that's why I took the motor and boat to the reservoir I don't know what else to say I've done everything I've taken the cover off on the side that covers the Pistons there's 10 bolts on that cover out...
  4. S

    No pee Johnson outboard

    Thank you on the pee steady I can't figure it out new thermostat new water pump the tube is in the right location it is unreal it's very frustrating
  5. S

    No pee Johnson outboard

    Water passages are clean
  6. S

    No pee Johnson outboard

    No barrel I'm running this on a small reservoir
  7. S

    No pee Johnson outboard

    I put a complete new water pump in along with a new thermostat. The passage ways are open. The copper tube is in the correct place. When I run the motor it pees then stops then pees then stops then pees keeps doing this, is it not supposed to pee continually or does this Johnson pees then stops...
  8. S

    No pee Johnson outboard

    This motor has got me ready to tear my hair out. I removed new thermostat, no change, thoroughly cleaned all water passages. New omc complete water pump, gaskets. I am 1000 percent sure tube is in correct location. Still intermittent pee stream. Never a solid continues stream. I don't know what...
  9. S

    No pee Johnson outboard

    Long story, I'll cut short. 1989 28 HP 2 stroke. Bought lower unit and put on my motor. Guy put new impeller in, I checked. Very little pee. Shut down due to too hot. Remove impeller, inspect, it's taller than housing. Drive shaft won't turn with out players. Take impeller out, put on belt...
  10. S

    lower unit conversion chart

    I searched my question on here before asking and cannot come up with the solution. I have a 1989 28 hp johnson and need a lower unit, I need a conversion chart of some sort to locate one. Somewhere I found info that a 25 to 28 hp ser. no 0432812 20 in. long shaft 1989 to 1996 will work, and I...
  11. S

    1995 0r 96 Merc. 2 stroke 40 HP Smoke comes out cowl

    I bought this boat and motor from a older guy and I asked when last time water pump replaced, he said he didn't remember. Keep in mind I never used the motor prior to me putting in a new water pump. After putting the new pump in and verifying it was pumping good water I took it out on the lake...
  12. S

    Oil reservoir. unhook or leave hooked up and my boat leans to the right, WHY?

    i just bought a 17 ft bass boat and I am trying to get things right before I go up to the big lake.( Erie( 40 hp 2 stroke merc. Really I got 2 questions 1. The motor seems to run real nice but when I run the rpm's up the boat wants to lean to the right. Is this what that thing on the bottom of...
  13. S

    1979 9.9 evinrude control box

    I have been working with this problem for a couple weeks when I can get some time. Ill include a photo of the control box so we all know what my problem is. Some of you are probably saying to yourselves I already know what he is going to ask. So , the wires that go in the box I have made all the...
  14. S

    Not permitted

    Mod EDIT: forum rules you agreed to prohibit Solicitation
  15. S

    In Trouble Again

    I will remove the carb tomorrow and put the reed valves back like they was. I will update u. Thanks
  16. S

    In Trouble Again

    A while back I ran across a 1986 2 stroke 25 hp Merc, electric start, with cables. I had the carb off couple times, finally I soaked the carb parts in a Napa product and ordered a carb kit. I could not get it to idle before the carb kit nor after the carb kit. Finally I sent the carb out to have...
  17. S

    Transported a 4 stroke

    Today I bought a 1999 4 stroke evinrude and 9.9 outboard and decided to drain the oil out of crankcase before transporting it. Is there anything I need to do as a precaution before I start it> Other than put filter and fresh oil back in?
  18. S

    stick steering

    I have purchased stick steering on line several times, i just saw the cable only on ebay just recently. I am getting ready to order another unit for one of my other boats.
  19. S

    merc 25 hp 1982 2 stroke wont idle

    Compression both cylinders 150, new plugs, great spark. real rough idle, hard to start. ser # 6211270. i had read where i could have a coil break down????? Really could use some help> Thanks
  20. S

    1995 15 hp 2 stroke mariner with controls.no pee.

    Just bought the motor used and thought Id hook it to water and c if it ran the way the guy said it did, well no pee. When I took the impeller out I thought it looked awful good, well I put new one in and still no pee. Whats the deal. What did I miss. I know the water pump is lined up properly...
Top