Search results

  1. D

    BRP Engine Tuner ?

    Will do, that makes sense . I’ll do the lake method
  2. D

    BRP Engine Tuner ?

    Thanks good to know.
  3. D

    BRP Engine Tuner ?

    Thanks
  4. D

    BRP Engine Tuner ?

    Thanks. Carb is cleaned up good as of now. I’ll clean up again if needed after the application…. Should I replace plugs after? I read somewhere to do so after application. I guess I can always inspect the plugs after
  5. D

    BRP Engine Tuner ?

    I have a can of BRP Engine Tuner I’m getting ready to use on my main use motor , a 71 25hp Johnson. I read a lot of posts online about this product and similar products and not trying to open that can of worms again. I figure it can’t hurt to give it a try on the motor I use the most while...
  6. D

    Does this indicate water in lower unit oil?

    Thanks for the input. 👍
  7. D

    Does this indicate water in lower unit oil?

    Great info thanks. I replaced the oil with west marine high viscosity 80W-90 lower unit gear oil. I changed the lower into oil in a 72 Johnson I’m fixing up and now it’s leaking from the drain plug screw. It’s was very low on oil. I placed a new OMC white washer on it but still has small leak...
  8. D

    Does this indicate water in lower unit oil?

  9. D

    Does this indicate water in lower unit oil?

    I changed the oil in the lower unit of my 71 25hp Johnson and noticed the oil looked tannish yellow while draining. See image of what I’m talking about. The other two outboards I also changed looked normal / dark-black colored. This is the first time I changed the lower unit oil on this...
  10. D

    Impeller replacement schedule

    Perfect. Thanks for all the feedback. I’ll plan to pull the lower unit and check o-ring etc every few years and might as well error on the side of caution and replace the impeller while I’m at it unless it looks new. I’m thinking every 3 years can’t hurt . Thanks again
  11. D

    Impeller replacement schedule

    Hello, curious if anyone can suggest how often to replace the impeller on early 70’s 25hp Johnson(OMC). I’m currently maintaining several of these outboards for my personal use on my fishing boat. I’m guessing it depends on how many hours I run them etc. I typically run them a few hours a month...
  12. D

    1972 Evinrude 25202r compression

    If you ran gas that’s is older and had ethanol in it and u did not add a fuel stabilizer, I would dump it, shoot compressed air through fuel lines. Then clean and rebuild the carb. OMC kits cheap online. I’ve had similar issues before I started using fuel stabilizer in every tank. I can only get...
  13. D

    Testing ignition on older OMC’s

    Hello, I recently found this info that helped me diagnose an ignition issue on my older Johnson. Thought it was worth sharing for those attempting to rule out ignition issues without the need to unnecessarily replace parts. Sorry if this isn’t the location to post the links but I found them...
  14. D

    1971 Johnson 25hp convert to electric start?

    Well older post but I just picked up another 25hp Johnson a 72. Now I have a 70, 71, and 72. The 72 was 300$ and is electric start. The motor ran good in the bucket but plan to use it for parts and throw the electric start on my 71. The 70 is my personal favorite but the 71 I have already...
  15. D

    1974 Evinrude 25hp wont run.

    👆
  16. D

    1974 Evinrude 25hp wont run.

    Also, I use Johnson/Evinrude 2stroke oil . Also available at Walmart, and at the hardware store near my place . I’m sure it’s no better than other brands but it said Johnson and I’m a fan. Think it’s 15-20$. Gallon lasts me awhile
  17. D

    1974 Evinrude 25hp wont run.

    They sell a outboard 2stroke oil measure containers at Walmart or online for less 10$. You add the required amount of oil up to the line on the container for the amount of gas you are adding to your tank. It has different oil level lines on the clear container for what oil to gas ratio your...
  18. D

    1970 25hp Johnson lower paint question?

    The gold paint is Evinrude/Johnson P/N 771252
  19. D

    1970 25hp Johnson lower paint question?

    The model number on the 1970 is 25R70E . The model and SN match the disc on the block and the number on the transom bracket. The 1971 is missing the number on the transom bracket and the disc on the block doesn’t show the model # it only lists a series of number (large M) then E3434678. It came...
  20. D

    1970 25hp Johnson lower paint question?

    the 71 was green but I accidentally purchased 2 cans of “gold” online and figured I would use it instead of dealing with trying to return it. Lesson learned but happy the way it turned out in the end. The 71 has a larger prop than the stock one on the 70. The 71 prop was on it when I bought...
Top