Search results

  1. M

    FD-11 impeller change? Anything special

    Hello, working on a 1957 18 hp Johnson. Gonna change impeller. Is there anything I need to know about this particular one? Is this like an 1984 9.9? Thx
  2. M

    Fd-11 how to check coil.

    Hey guys got the carb rebuilt and put back on. New head gasket. Compression is 100 both cylinders. I have spark on top plug, no spark on bottom. Want to check coil before I replace it and points. I’ve watched a few videos about how to check primary and secondary. Is this the correct setting for...
  3. M

    FD-11 carb kit. Please enlighten me?

    Hello I purchased the OEM carb kit. I’m assuming this is for multiple carbs. Please look at pics, I don’t want to leave anything out. I took out what I know that goes in my carb. I know it takes 4 packing bushings. The other items I’m not sure about.
  4. M

    Dual line connector. Rebuild?

    Working on an FD-11 and found a dual line pressure tank locally. The connector that goes from tank to motor seems to be stuck internally. I know you can rebuild these. Does anyone have a link on a “ how to rebuild” thx.
  5. M

    Much appreciated!!

    Just want to share my experience about this website I piddle around with a few motors here and there Just want to say thanks to everyone that’s offers opinions and advice.. The knowledge here is awesome and appreciated! Thanks again.
  6. M

    Fd-11 needle valve bushing

    Does this bushing just kinda drop in the opening then put in 2 packing washers then the low speed needle? Thank you
  7. M

    High speed needle seized?

    Hey guys 57 fd-11. Doing a carb cleaning and rebuild. 2 issues. High speed needle stuck and drain screw sheared off one side. Best method to fix both? Thx
  8. M

    1957 FD-11 update/progress

    Ok, again this is my buddies motor. Piston were a little seized from sitting, got those unstuck. Compression both cylinders around 100. Coils, points and condensers look to be in good shape. Still gonna order a carb kit today. He’s trying to find the old dual line tank. and I think she’ll fire...
  9. M

    Johnson FD-11 carb kit?

    Hey guys a friend of mine has a 1957 FD-11 18hp Johnson that was his grandfathers. He wants me to help him get it running. Looking for a carb kit or do I have to buy parts individually? Thx
  10. M

    Evinrude carb repair 15hp 1976

    Got my carb kit in today and put everything together. Except these plugs. Replace or not to replace? If so how do you replace them? Thx
  11. M

    76 Evinrude 15hp needle valve seat?

    Ok so my carb kit is supposed to be in tomorrow.Trying to get a jump on things. What is the best way to install the needle valve seat? Can it be put in backwards? Thanks
  12. M

    1976 Evinrude 15hp carb rebuild!

    Does this need to be removed to do a carb rebuild? Or can I just run a small wire in the opening and compressed air? Thx
  13. M

    1976 Evinrude 15hp. Carb issue?

    Hey guys, I recently purchased a 1976 Evinrude 15hp. Just took it to the lake it idles great, slow speed adjustment is great. Idles down real low. I put it in gear and gave it full throttle and it would open up, but sometimes after I let off of it. Motor starts to spit and sputter and sometimes...
  14. M

    1976 Evinrude 15hp. Fuel questions?

    Not sure if this question belongs here? If so please move accordingly. I have a 1976 Evinrude 15hp. I try to use non-ethanol gas, but if I can’t find it, what type of additive should I use being it’s two-stroke? Thx
  15. M

    76 Evinrude 15hp link and sync?

    Hello I have a 76’ 15 hp Evinrude, I’m looking at LeeRoy’s ramblings on how to do the link and sync? Question? Do I have to remove the flywheel?
  16. M

    To grease or not to grease?

    Should I put grease on the prop shaft before installing prop on a 15 hp Evinrude? Thanks
  17. M

    76 Evinrude 15hp thrust washer?

    Hello, I have a 1976 Evinrude 15hp. Ordering a new thrust washer for my prop. I noticed there are two part numbers listed? Is there a difference or did one supersede the other. #0323942 and # 0318959. Thx
  18. M

    Converging ring install?

    Hello, I have a 1976 Evinrude 15hp. Trying to install a factory converging ring on original prop. Any tips or tricks? Having a little difficulty thx.
  19. M

    1976 Evinrude 15hp?

    Hey guys, I bought a 1976 Evinrude 15 hp today. I currently have a 1984 Evinrude 9.9. Are any parts interchangeable? Such as prop, throttle handle? They look the same other than the 76 has a more low profile hood.. Thank you
  20. M

    Converting 9.9 to 15 hp?

    Hello, question for the experts. I have a 1984 Evinrude 9.9 hp. Saw videos that it can be converted to a 15 hp just by changing the carb? Yes or no? Thank you.
Top