Search results

  1. rolmops

    Strange issue...Shift shaft stuck in upper unit and came out of lower unit, need help!

    It sounds to me that you have to separate the middle section from the engine and give it a complete cleaning job. Soaking the engine bottom in kerosene will loosen up the gunk and when you have it cleaned up , a good amount of penetrating oil where the drive shaft goes into the block may help as...
  2. rolmops

    S A F E T Y B R I E F I N G

    Ever since I had to make the fireworks that mean business, I sincerely dislike the toy version.
  3. rolmops

    Pontoon Bimini top repair sewing

    Canvas needs to be done with a heavy duty sewing machine or by hand with a special tool that you can buy in west marine or a hobby shop for half the price of what west marine charges. There a lot of people who do canvas sewing repair for small repairs like this for a very reasonable price. The...
  4. rolmops

    converting a long shaft 1982 7.5hp Evinrude to a short shaft question

    It is just copper tubing. You can use a pipe cutter and cut the 5 inches from the bottom, like this
  5. rolmops

    converting a long shaft 1982 7.5hp Evinrude to a short shaft question

    You pull it out, then cut off 5 inches and stick it back in
  6. rolmops

    Question for Starcraft Chieftain owners

    it is a matter of opening the top window and cabin door and aiming into the wind when moving so the air moves through the cabin
  7. rolmops

    Takes on water over the transom while loading and unloading

    Open those drain holes so the water can get out. and launch slowly, while making sure nothing keeps it tied down to the trailer in the back.
  8. rolmops

    What do you Recommend for Beautifying a Teak Swimstep?

    "I suggest a scantily clad southern belle. Nobody will look at the paint job
  9. rolmops

    replacing transom, has anyone used AL square tube instead of wood?

    I do not think that there is such a thing as I-Boats opinion, The rotting within fifteen years as mentioned before is a thing that can be seen in many places. It is because because people buy boats, only to find out that it is not plug and play and they are not interested in the care taking. Add...
  10. rolmops

    kicker location

    Unless my fishing buddy is big and fat....
  11. rolmops

    I'm sad, need new gps

    I would buy a Garmin with a proper mapping setup that can be refreshed online. Tidal currents tend to change channels and their depth. The boss will not be happy if you show up late without fish and up to your neck covered with muck
  12. rolmops

    For those of us who tow our boat, do you inspect it ?

    That could have caused some serious damage on the road. Imagine that one wheel deciding to go off by itself. Yes, I do inspect the trailer yearly for nasty stuff like that. In NY every trailer has to be inspected yearly, but I doubt that this sort of thing would have been picked up on. The...
  13. rolmops

    Strange boat disease strikes.

    Sylvan is Starcraft in all but name. It is made in the same factory by the same people. When the founder of starcraft passed , the company was divided among the kids. The daughter's share continued under the name Sylvan, There are some very minor differences.
  14. rolmops

    Strange boat disease strikes.

    We do repairs and improvements for sure, It is just that aluminum in fresh water is very sturdy, besides, what's not to love? I would also like to add the Penn Yan rigs that seem to last forever on the great lakes. I fish from a 1989 28 footer and we have had offers to buy this rig for far more...
  15. rolmops

    Strange boat disease strikes.

    That is generally true, unless it's a Starcraft
  16. rolmops

    Shot in the Dark Depth Transducer Compatibility

    like this? This is a garminplug, it is called a 5 8 because 5 of the 8 holes are active
  17. rolmops

    Shot in the Dark Depth Transducer Compatibility

    Ok here comes a fairly educated guess . The plug is a female end called a 5-8 F G This is used on the Airmar B117 and fits Garmin and Echomap units of several years. It is a 600 Before you go out and buy, go find somebody with a garmin fishfinder and double check this info. I am pretty sure...
  18. rolmops

    Shot in the Dark Depth Transducer Compatibility

    this may help : Most through hull transducers are made by Airmar . If there is a number or a name on the transducer you can use this as a guide. https://www.airmarweb.com/xref.html
  19. rolmops

    Installing a transducer in an aluminum boat

    It certainly is the easiest way to go and while trolling it works great. But when scouting for fish at higher speeds (say 10 mph) it becomes much less so because of turbulence. Shooting through a metal hull is a no no . It does not work. The only way to go through the hull is by making a hole in...
  20. rolmops

    Installing a transducer in an aluminum boat

    The ringing would only be an issue if you glue the transducer down onto the aluminum. the way to go is to drill a hole through the aluminum and install the transducer that way. Airmar sells them with this installation in mind. ( I wrote it this way because I always get mixed up between "through...
Top