Stinnett21's latest activity

Not able to determine "when" RPM's were done but this is ranges and collective times Shows most were at idle to 3500 RPM

Received new pump Looking in the glove box and found 4 fender quick clips (like the ones on the Chap) but in a surprise found a torx bit...

Back on the I/O and the comments about wave height on local lakes, I bought a 1965 18' Starcraft Holiday I/O thinking the boat would...

Check out Tinboats.net. I would post over there.

The trend toward pontoons, center consoles and wake boats was the nail in the coffin to I/Os. The I/O was bowrider family friendly...

A review of the MSDS sheets for both 2-4-C and Extreme grease show that while both greases are supplied by the same manufacturer, the...

Maybe just remove paint and leave natural?

What about powder coating?

Thanks Mike. Pics of your work look awesome. A few questions if you don't mind. 1) "Urethane single stage" is what I tell them I...

I want to "paint" or otherwise restore the support flange for my floor storage. Obviously a high traffic area and sometimes a cooler...

Thanks to all.

I have an older tube and the grease is a very dark green color. Recently bought another and now the grease is light brown/beige. Just...

here's an old pic of what I set up on my Four Winns to support the cover for snow, some years we get nothing some years we get a lot. I...

I'm in KY so not exactly snow country but for around 3 years I used a seal skin cover over top of my sunbrella snap on covers with...

The bunk supports appear to be welded. I suppose you could abandon them and add ones that are adjustable.