Nordin's latest activity

  • N
    Nordin replied to the thread Late 70's to Late 80's - Worth shopping for?.
    If you can and will work on the engine I would go for OMC or Mercury engines from late 70.es and up until late 90.es. Newer engines from...
  • N
    Nordin replied to the thread 1988 125 HP Force Rebuild.
    Sandy in my opinion you do not need to balance the flywheel because of that little piece missing. It is just a couple of grams (I am in...
  • N
    Nordin replied to the thread 1988 125 HP Force Rebuild.
    There should be a sensor mounted in the head. A orange wire goes from the sensor to the terminal strip. It is a sensor not a sender, it...
  • N
    Nordin reacted to Scott Danforth's post in the thread Old 6 hp wizard made by chrysler with Like Like.
    if its a 67 or 68, its 40:1
  • N
    Nordin replied to the thread Old 6 hp wizard made by chrysler.
    As it is a 1967-68 it suppose to have needle bearings in the crank shaft and in the connecting rods (the Chryslers does). You should be...
  • N
    Nordin replied to the thread Chrysler 35hp Tachometer.
    Aftermarket tachometers often use the signal from the alternator and than you have to have a tachometer that will work with a 8 pole...
  • N
    Nordin replied to the thread Chrysler 35hp Tachometer.
    Yes if it has battery ignition system. White cable for the top ignition coil will also feed the tachometer with pulses.
  • N
    Nordin replied to the thread What year?.
    Would guess 1995 and newer. Mercury stop build Force after 1999.
  • N
    Nordin replied to the thread 1974 35hp Chrysler. Battery ignition..
    357HE is a 1974, 35Hp from 1976 and later I believe and from the 25, 30, 35Hp family you just set the points gap. No fine tuning at a...
  • N
    Nordin replied to the thread 1974 35hp Chrysler. Battery ignition..
    If it is a 1974 year model it is from the engine family 35-45-50-55Hp. All things on the engine was swapable to the different horse...
  • N
    Nordin reacted to Chrisham's post in the thread 1976 456hh 45 hp.magneto model with Like Like.
    Sorry for the late reply .I finally got some new coils as mercury made some.I relaced both and the Ole 45 is running great thanks...
  • N
    Nordin replied to the thread Cracked bearing carrier, run or replace?.
    Yes as racerone says, when installing the carrier you have to turn the crankshaft or the prop shaft sligtly. The revers gear and the...
  • N
    Nordin replied to the thread 1974 Chrysler 135 hp limping.
    That clean head can indicate water intrusion in the cylinders. Head gasket looks fine BUT you may have a crack in the water jackets and...
  • N
    Nordin replied to the thread 1974 Chrysler 135 hp limping.
    WinnerCougar74 looks like pre detonation has damage one of the pistons and lean mixture or clogged carb damage the other. Maybe some...
  • N
    Nordin replied to the thread 1987 Force 50hp head warpage..
    Yes like racerone says. Resurface it at a piece of glass and water sanding paper. sand it and do it in a 8 pattern way. Check it with a...
Show older items
Top