I have a 3 carb motor. i put my enrichment valve back onto my motor. two hoses come from the valve and 1 of those has a "T" connection on it. off the "T", 1 hose goes in front of the carbs and connects to the top carb and off the other part of the "T", its connected to a 90 degree elbow on the...
well i have had the powerhead for my motor rebuilt a few weeks ago. got it back and i was told that while i begin to put it all back together, that i should drop the lower and change the impeller for the water pump along with the gaskets. i was also told that i should put my powerhead on while...
I have a 1993 or so (im guessing because that what the paper work says) mariner 60 hp on my 22 ft pontoon boat. i need a new powerhead so i have to acquire my serial number on my motor but i do not have the plate there anymore. it is gone! idk what to do since i need it when i order my new...
okay well u all know i have torn apart my 88 bayliner capri with the 3.0 OMC. i have not put any money into it except to buy 1/2" foam for templates. but still, i talked to a friend and he said is it really worth it to put all my time and whatever money it costs to rebuild this boat, get a...
I am looking for a website or somewhere i can purchase new foam to use when i reupholster the side panels of my 88 bayliner capri!
im sure you all know that bayliner ended up using a few different colors, as for the side panels...there are individual pieces of foam cut on diaganals for the...
I have a 1988 bayliner capri with the OMC 3.0 with the Cobra Outdrive. it isnt running at the moment due to a bad starter but i spun the prop while i was working on the boat and it wobbles while spinning.
what can i do to check what exactly it is?
i looked at an entire rebuilt or new lower...
Hello all,
New to this so here i go. i bought this boat in june 2011 for $300 because it had no spark. Put a $6 condensor in it and started right up within a few minutes. but as for my first boat, i didnt see any rotting, didnt really know what to look for i should say! just that the seats were...