FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
So it was this piece. But I feel like the teeth are in great shape if anything where the plastic rod sits in the back is where it’s worn out, it feels like it has lots of play when that rod sits in there.
Hey guys I have an E10RCNS that has a broken recoil spring it’s a red piece that moves back and forth when you pull the recoil. I found a guy with a parts motor I was gonna buy that and the whole throttle arm for $80.my mechanic told me “the throttle arm
Bushings are all worn out on it” but in...
Good question I’d have to dig into the E90ELEUC more and there’s so much information on the internet I’m not sure where I’d find it. Maybe it’s time to pay for a technician maintenance manual.
So I got the wife to pump the timer bulb constantly and she stayed level at 4000RPM for a good 5 minutes. Got her to stop and as I throttled down it started to bog down a bit. So I do believe I might remove all the fuel lines and re install for next season.
Here is the prop I have no idea how to tell the pitch etc. So before I fixed the power packs yes I could push the key in for the choke and it would open up more. It doesn’t quite do that anymore. Maybe a bit. But yes I’ll get my wife on the back at the primer bulb and when it bogs down I’ll get...
The boat is a 1989 Cadorette bow rider. I’d have to take a look at the prop for ya after I pull it out this weekend, this I have zero experience with. I had it out last night and if I put it at 3/4 throttle it hums along nicely at 4000RPM, but I know it wants more. As soon as I push the...
Hey guys. I figured making a new thread would be best. I have a 1996 90HP evinrude. Just replaced the two coils and new spark plugs. When I first gun the throttle it goes up to around 4500RPM and sounds great, holds that for about 5-8 seconds then bogs down to 4000RPM and further bogs down to...
Sooo…. Here we are again. The coils are fixed and it absolutely rips around 4500 RPM but after about 5-6 seconds it it goes down to 4000RPM and surges. Then the RPM goes down to about 3400 and just stays there.
I feel like this is definitely a fuel delivery issue? I can lay back on the...
So I had a guy diagnose it today and he said the two coils on the right side of the motor were cracked. That explains why the right side of the motor was cool to the touch and only the left side was hot. This also limited the RPM to 2000. So after I replace the two coils I will report back and...
