Search results

  1. C

    E10RCNS Throttle arm bushings ID help

    So it was this piece. But I feel like the teeth are in great shape if anything where the plastic rod sits in the back is where it’s worn out, it feels like it has lots of play when that rod sits in there.
  2. C

    E10RCNS Throttle arm bushings ID help

    Hey guys I have an E10RCNS that has a broken recoil spring it’s a red piece that moves back and forth when you pull the recoil. I found a guy with a parts motor I was gonna buy that and the whole throttle arm for $80.my mechanic told me “the throttle arm Bushings are all worn out on it” but in...
  3. C

    Evinrude E90ELEUC RPM issue while running.

    Here are the numbers off the prop
  4. C

    Evinrude E90ELEUC RPM issue while running.

    Good question I’d have to dig into the E90ELEUC more and there’s so much information on the internet I’m not sure where I’d find it. Maybe it’s time to pay for a technician maintenance manual.
  5. C

    Evinrude E90ELEUC RPM issue while running.

    Yes do you suggest I install an inline fuel filter? I think this definitely could help the situation.
  6. C

    Evinrude E90ELEUC RPM issue while running.

    So I got the wife to pump the timer bulb constantly and she stayed level at 4000RPM for a good 5 minutes. Got her to stop and as I throttled down it started to bog down a bit. So I do believe I might remove all the fuel lines and re install for next season.
  7. C

    Evinrude E90ELEUC RPM issue while running.

    Here is the prop I have no idea how to tell the pitch etc. So before I fixed the power packs yes I could push the key in for the choke and it would open up more. It doesn’t quite do that anymore. Maybe a bit. But yes I’ll get my wife on the back at the primer bulb and when it bogs down I’ll get...
  8. C

    Evinrude E90ELEUC RPM issue while running.

    Here’s some pictures of a smilar hull. It’s not my boat pictured.
  9. C

    Evinrude E90ELEUC RPM issue while running.

    The boat is a 1989 Cadorette bow rider. I’d have to take a look at the prop for ya after I pull it out this weekend, this I have zero experience with. I had it out last night and if I put it at 3/4 throttle it hums along nicely at 4000RPM, but I know it wants more. As soon as I push the...
  10. C

    Evinrude E90ELEUC RPM issue while running.

    Correct it’s at full trim.
  11. C

    Evinrude E90ELEUC RPM issue while running.

    Hey guys. I figured making a new thread would be best. I have a 1996 90HP evinrude. Just replaced the two coils and new spark plugs. When I first gun the throttle it goes up to around 4500RPM and sounds great, holds that for about 5-8 seconds then bogs down to 4000RPM and further bogs down to...
  12. C

    Evinrude 90HP won’t go over 2000RPM

    Sooo…. Here we are again. The coils are fixed and it absolutely rips around 4500 RPM but after about 5-6 seconds it it goes down to 4000RPM and surges. Then the RPM goes down to about 3400 and just stays there. I feel like this is definitely a fuel delivery issue? I can lay back on the...
  13. C

    Evinrude 90HP won’t go over 2000RPM

    So I had a guy diagnose it today and he said the two coils on the right side of the motor were cracked. That explains why the right side of the motor was cool to the touch and only the left side was hot. This also limited the RPM to 2000. So after I replace the two coils I will report back and...
  14. C

    Evinrude 90HP won’t go over 2000RPM

    I’ll look into the cost of one today thanks again racer.
  15. C

    Evinrude 90HP won’t go over 2000RPM

    Yes I will post I have a marine mechanic gonna take a look at it for me next Wednesday. I’ll post his findings.
  16. C

    Evinrude 90HP won’t go over 2000RPM

    Hey guys just a thought I didn’t have time to do all that troubleshooting you guys suggested yet, but I remember just before it happend I asked my daughter to put the boat into neutral from a slow forward and I think she did it without depressing the red grip switch on the shifter. Could that in...
  17. C

    Evinrude 90HP won’t go over 2000RPM

    I will try the impeller. From what I remember I will need to drop the lower unit for this.
  18. C

    Evinrude 90HP won’t go over 2000RPM

    Ok perfect this is one thing I will take a look at when I get back home. Does anyone know where I can download a copy of the service maintenance manual for this motor?
  19. C

    Evinrude 90HP won’t go over 2000RPM

    So it was on the driver side (port) where there is only one wire(tan) and that side was nearly scalding to the touch while the other side was just warm. I’m not worried about the spark plug gaps because the engine was running perfect for days then suddenly stuck at 2000rpm. I find it hard to...
  20. C

    Evinrude 90HP won’t go over 2000RPM

    Roughly 3/8” gap. I did not use a spark tester we pulled the plug and re attached the wire with it grounded on the power head to test spark.
Top