Finally going to paint my Starcraft. The bottom paint is in decent shape(solid, not flaking)....aside from a few bare spots. Going to use aluminum etch primer for the bare spots.
Bought Majic White paint and also gray primer. Since the existing paint is in decent shape...do I need to use...
I have a couple newer style coils that are for 1979-84 2-6cyl models (CDI 183-2366 and a #582106 OS5P). Can I use them on my 1978 Johnson 70hp? My motor has the older screw type power pack.
Can I simply retrofit ring terminals on them and connect them to my power pack?
Haven't been active here in quite awhile, so no better time than the present to change that. For those of you that are familiar with my boat, I did a blue-collar resto on it a couple seasons ago. I've enjoyed the boat since that was completed, but wasn't completely happy with the layout. The...
At the end of last season...I was working on the boat in the driveway(on something unrelated)....and saw smoke coming from inside the boat. Power trim wiring harness shorted out somehow and the wires got so hot that the insulation was burned off the wires. Had to scrambled to get the battery...
The motor is pretty new to me. When I first picked up the motor...spark was weak on all cyls, so I just replaced all 3 coils/spark plugs. Compression was 120/120/100. (Not great numbers, I know). I decarbed the snot out of it the other day, but didn't do another compression check to see if...
Motor: 1981 Evinrude 75hp Model#E75TRLCIM
This is my current setup:
This is the coil I just received. It only has one wire, whereas the old coil I have on the motor has 2 wires coming from the back of the coil
Do the metal tabs on the NEW coil act as the ground rather than using a wire as...
Just picked up a 16' Blue Fin tinny w/ a great running 1981 Evinrude 75hp w/ power trim and tilt(3-wire version). Seller says that trim/tilt switch broke. Currently have a pigtail with the 3 wires...black, green, and another color(im not home so can't confirm the colors)....hanging out from...
Lower unit seized up solid today. Gear oil only had a few hour on it.
In hindsight, I should have known that there was a problem with the LU. Last week, I loosened the screw to drain the gear oil and the oil EXPLODED from the hole and covered me head to toe....and the oil smelled awful! Not...
Lower unit seized up solid today. Gear oil only had a few hour on it.
In hindsight, I should have known that there was a problem with the LU. Last week, I loosened the screw to drain the gear oil and the oil EXPLODED from the hole and covered me head to toe....and the oil smelled awful!
I'm...
I currently run a 12v trolling motor and run my bilge pumps and fishfinders off the same battery as the TM.
I'm considering picking up a 24v trolling motor. I'll have to wire the 2 batteries "in series" to run the TM. Will I need to buy yet another battery to run the bilge pump,fishfinders...
I have a Humminbird 570DI fishfinder. Currently the transducer is mounted on the transom....and the display is on the bow. I want to add a trolling motor mounted transducer. I'll be using the transom transducer when the boat is underway...and the bow mount transducer when fishing.
An...
My mother lives in SC and is considering buying this boat.
2003 Caravelle 187 Fish & Ski for sale | Ocean Isle, NC
She took it for a sea trial and it ran flawlessly. It's on consignment at this dealership. The price is $10k including the Load rite trailer. Has under 200 hours and was run on...
I'm having a helluva time finding a lower unit for my motor. What years and hp lower units will fit my 75hp?
I know 1979 was a changeover year...they changed from a 3-spline to a 4-spline shaft.
I've got a seller with a 90hp Johnson, but I have no idea if it'll fit.
I'm considering buying a 1980 6-cyl Mercury 90hp. 135-140psi on all cyls.
Problem is that the ignition switch is bad(according to seller)...and motor has to be started by bypassing the solenoid. It then had to be turned off by using the choke to smother it.
Seller is asking $300 for motor...
Ive been doing my usual "bottom feeding" and found a 70hp Merc in super shape for $125 bucks.....I couldn't pass it up.
Model number is 6163035
I'm thinking maybe 1983.
If this is correct....I need to figure out what controls are compatible with it.