Recent content by Bob Weily

  1. Bob Weily

    199?? 40hp force year question

    Can you post a picture of it? Also what is the number on the inside of the lower unit? Should be by the impeller housing
  2. Bob Weily

    Force 40 shifting problem

    This is the shifter
  3. Bob Weily

    Force 40 shifting problem

    This is why it won't shift
  4. Bob Weily

    Force 40 shifting problem

    Alright, thanks for the info. hopefully I didn't mess it up too bad
  5. Bob Weily

    Force 40 shifting problem

    Top of screen shows shifting
  6. Bob Weily

    Force 40 shifting problem

    1994 Force 40 Winter is ending...any day now... We had a warm day and I started to go thru the engine before the season. I shifted it up to full throttle and everything looked good, when I shifted back down it stayed at full throttle. I can shift it down at the console, but will not go back...
  7. Bob Weily

    Force 40 issues

    How do you usually do that? I took it to a machine shop
  8. Bob Weily

    Force 40 issues

    clutch dog*
  9. Bob Weily

    Looking for a manual and any general information on this motor i recently aquired from a friend .

    maybe here https://watercraftmanuals.com/outboard/westbend/
  10. Bob Weily

    Force 40 issues

    Here's a pic of the old dog clutch
  11. Bob Weily

    Force 40 issues

    You called it. One washer was in the wrong place. Put it back in the correct spot & It is all good now, thank you!
  12. Bob Weily

    Force 40 issues

    I did not replace any parts, I will go thru it again and check all the washers
  13. Bob Weily

    Force 40 issues

    When I loosen the two Allen bolts on the prop shaft cover it loosened the prop shaft up again. But the Allen bolts are then loose, not tight at all.
  14. Bob Weily

    Force 40 issues

    Rebuilt the whole lower unit, shifting well and everything lined up, but feels very tight when I turn the prop by hand. Is that just because there is no oil?
  15. Bob Weily

    Force 40 issues

    Made a puller with 2 hooks, 2 bolts and a 2x4. Worked great
See more
Top