So here is what's going on I purchased a boat from a guy who said it hadn't run in a couple years it has A 3.7 L MerCruiser took it home found radiator fluid in the cylinder took the head off broke the Pistons free re-lapped The valves and reassembled the head on the motor after manual...
Hi guys was wondering if anyone could help me I was given a 1985 170 4 cylinder it supposably ran when it was parked 6 YEARS AGO I poured oil in the cylinders when I got it home changed the oil found what looks like radiator fluid in it not a lot but some and let it sit for two days tryed to...
hey guys I have a 1978 bayliner aq120b and 270 outdrive the thing im wondering is I have what appears to be a vent on the valve cover but it doesent have a hose to it and no where to go I think it probley goes to the flam arester but it has no sort of set up to go on to the flam arrester can I...
hey guys I have a 1978 bayliner quartermaster with a aq120b motor 270 outdrive and I rebuilt the carb last year its the solex44 phn3 and I reamed on the check valve to hard I gess and it broke the top off any ways I took it out to start the season and it is really killing out at take off...
hi guys heres what im working on i have a 78 bayliner quartermaster with the aq120b/270 and i am puting it back to geather after a rebuild and i want to replace the gimbel bearings before i put it in the boat i have seen Don S's post on the process but the profesonal tools listed for the job i...
my question is i have 6 big tubes of DAP 4000 sub floor adhisive and i want to know if i can use this instead of the PL to bed my stringers and if not why not is there anything different
my question is i have 6 big tubes of DAP 4000 sub floor adhisive and i want to know if i can use this instead of the PL to bed my stringers and if not why not is there anything different
i have a aq120b motor that i recently rebuilt and i cant store it in the boat because it is having the deck rebuilt so the motor is going to be stored under my lean to and my question is what do i need to fog it with to keep moisture out of it because it doesent have intake manifold on it yet...
im wondering if anyone can tell me what to bed my stringers with ive been told somtimes if you put your stringes directly on the hull it can crack it if you hit a big bump or over time
do i need to have my flywheel reserficed on my 78 aq120b or can i just sand all the rust off and add the anti seize and where do i need to put the anti seize on the flywheel could some one help
I have a 78 volvo penta aq120b with a 270 outdrive and I took the upper gear box off so i could get my motor out and im wondering if anyone knows what the part numbers are for the o rings and any gaskets ill need for reasembly thanks
hi i bought main and rod bearing for my aq120b motor i went to put them in today and noticed that the rod bearing all have on the top 1/4 inch scraches on them i did the finger nail test and could feel slite grab but i ran my nail up and down a bit and the grab turned to really nothing but i can...