This is my first time performing sterndrive service.
I pulled the sterndrive to do the normal checks of u-joints, gimble, etc. Reading the manual, it says the rubber gasket (one in the bore infront of the drive bellows retaining ring) must be glued in the bell housing bore.
What type of glue should be used? The manual does not mention anything.
I pulled the sterndrive to do the normal checks of u-joints, gimble, etc. Reading the manual, it says the rubber gasket (one in the bore infront of the drive bellows retaining ring) must be glued in the bell housing bore.
What type of glue should be used? The manual does not mention anything.