Hello everyone, I'm 60yrs old no nothing about motors. Thought I could buy a small engine to go on my Jon boat and do some fishing.(Headache)
Here's my story:
I just bought this motor and it ran at the persons house. The man that I bought it from redid the carburetor and put in a new impeller.He said its a great running motor and you will have no problems. I said that's what I want. I loaded it my truck by laying it on its side. When I got home I put it on the engine stand he gave me. A few days past due to being cold and the ice was still on the lakes here in New Hampshire. We had a nice day so I put the boat in the water with the motor.. I tilted the motor up so it wouldn't hit the bottom of lake shore. I got out where it was now deep and the motor started right up. I got about 150 yards and the motor stopped running. I kept trying to pull the rope cord to start but nothing. Luckily I brought my trolling motor along and got back to shore. I called the guy back and told him what happened and he said sorry it ran when I sold it to you and it was as is, which he didn't say at the sale. So I hung up because I knew he wouldn't help me.
The next day I put the motor in a garbage can to see if I can start it. I get the motor started after a few pulls and let it run for a while.I then shut it down and can't get it started again. If it sits for a long time I can then restart it after many pulls. I tested for spark and I do have that. I have water coming out the peep holes. The compression test out of each cylinder was 30. He said the compression was good when I bought it, I didn't do a test at his house because the engine ran fine. Model
Could I have caused the problem when I tilted the motor up and forgot to put it back down to the bottom position. The bottom of motor was in the water and moving me along?
The starter, pulling the rope seems to pull sluggishly, could that be due to the cold? Then it pulls fine afterwards.
Could laying the motor on its side cause problems.
He gave me the gas can with gas in it.. That was what we used when running motor which ran fine. I dumped that out and got fresh gas 91 octane to see if that might help (it didn't).
I never dealt with engines, I wanted something that I could put in the water and go fishing..e tune ups and self maintanance, Hopefully I wasn't ripped off and it doesn't turn into something major. PLEASE HELP!!!!!
Here's my story:
I just bought this motor and it ran at the persons house. The man that I bought it from redid the carburetor and put in a new impeller.He said its a great running motor and you will have no problems. I said that's what I want. I loaded it my truck by laying it on its side. When I got home I put it on the engine stand he gave me. A few days past due to being cold and the ice was still on the lakes here in New Hampshire. We had a nice day so I put the boat in the water with the motor.. I tilted the motor up so it wouldn't hit the bottom of lake shore. I got out where it was now deep and the motor started right up. I got about 150 yards and the motor stopped running. I kept trying to pull the rope cord to start but nothing. Luckily I brought my trolling motor along and got back to shore. I called the guy back and told him what happened and he said sorry it ran when I sold it to you and it was as is, which he didn't say at the sale. So I hung up because I knew he wouldn't help me.
The next day I put the motor in a garbage can to see if I can start it. I get the motor started after a few pulls and let it run for a while.I then shut it down and can't get it started again. If it sits for a long time I can then restart it after many pulls. I tested for spark and I do have that. I have water coming out the peep holes. The compression test out of each cylinder was 30. He said the compression was good when I bought it, I didn't do a test at his house because the engine ran fine. Model
Could I have caused the problem when I tilted the motor up and forgot to put it back down to the bottom position. The bottom of motor was in the water and moving me along?
The starter, pulling the rope seems to pull sluggishly, could that be due to the cold? Then it pulls fine afterwards.
Could laying the motor on its side cause problems.
He gave me the gas can with gas in it.. That was what we used when running motor which ran fine. I dumped that out and got fresh gas 91 octane to see if that might help (it didn't).
I never dealt with engines, I wanted something that I could put in the water and go fishing..e tune ups and self maintanance, Hopefully I wasn't ripped off and it doesn't turn into something major. PLEASE HELP!!!!!