Hey guys new to the forum, I have a 1982 15hp Evinrude 2 stroke E15RCNC that I bought with a John boat a few years ago.. Motor ran good with a few hiccups every once in a while until the last boat outing when it just died on me heading in from fishing.. the motor would stumble and wouldnt run that great unless I pulled out the choke.. Bottom cylinder is wet and with fuel, but the motor will run on the top cylinder with the bottom plug out..
I've replaced the fuel pump and rebuilt the carb with no luck and can't find anyone around that will work on this thing so I'm thinking about trying to fix it myself..
Anybody have any ideas as to what it possibly might be? Thought possibly it could be the leaf (reed) valve but it isn't spitting put the carb like I have read on a few other threads.. Compression test was a tad bit lower on the bottom cylinder (105 on the top and 95 on the bottom)
Any help would be greatly appreciated guys!!
Thanks
Jonathan
I've replaced the fuel pump and rebuilt the carb with no luck and can't find anyone around that will work on this thing so I'm thinking about trying to fix it myself..
Anybody have any ideas as to what it possibly might be? Thought possibly it could be the leaf (reed) valve but it isn't spitting put the carb like I have read on a few other threads.. Compression test was a tad bit lower on the bottom cylinder (105 on the top and 95 on the bottom)
Any help would be greatly appreciated guys!!
Thanks
Jonathan